My Orders
Graco Paint Sprayer Parts
GET YOUR OFFICIAL Graco PARTS TO ENSURE VICTORY
Popular Graco Paint Sprayer Parts
It is an authentic OEM supplied replacement part that is specially designed for Graco sprayers. This o-ring provides an air tight seal for the pump, please make sure to check appropriate diagrams for correct location and use of this item. Note that one durable rubber o-ring is included per order.
It is an authentic OEM supplied replacement part that is specially designed for Graco sprayers. This o-ring provides an air tight seal for the pump, please make sure to check appropriate diagrams for correct location and use of this item. Note that one durable rubber o-ring is included per order.
This is an authentic Graco replacement part that has been sourced from the original manufacturer and is intended to be used with paint sprayers. The o-ring is used to seal the connection between the suction hose and the pump assembly. The o-ring is priced as a single item, please note two may be needed.
This is an authentic Graco replacement part that has been sourced from the original manufacturer and is intended to be used with paint sprayers. The o-ring is used to seal the connection between the suction hose and the pump assembly. The o-ring is priced as a single item, please note two may be needed.
This O-ring, also known as a gasket, is a genuine OEM replacement part designed for use in air sprayers. It is a rubber seal with a diameter of approximately 1.5 inches, that sits between the pump and filter to prevent air and paint leakage between the two mating parts. If the ring is lost, worn out, damaged, or has lost elasticity, it will need to be replaced. A faulty O-ring will result in issues such as leaking, low pressure, inconsistent spray patterns, and friction damage between the filter and pump. To replace the O-ring, open the sprayer housing and twist the pump off. Carefully pry the old O-ring off and clean the mounting area to ensure a good seal for the new ring. Place the O-ring over the filter and apply light pressure until it is flat against the surface. Reassemble the equipment to complete your repair.
This O-ring, also known as a gasket, is a genuine OEM replacement part designed for use in air sprayers. It is a rubber seal with a diameter of approximately 1.5 inches, that sits between the pump and filter to prevent air and paint leakage between the two mating parts. If the ring is lost, worn out, damaged, or has lost elasticity, it will need to be replaced. A faulty O-ring will result in issues such as leaking, low pressure, inconsistent spray patterns, and friction damage between the filter and pump. To replace the O-ring, open the sprayer housing and twist the pump off. Carefully pry the old O-ring off and clean the mounting area to ensure a good seal for the new ring. Place the O-ring over the filter and apply light pressure until it is flat against the surface. Reassemble the equipment to complete your repair.
Installation Instructions
Tyler from GRESHAM, OR
The O-ring that was on my Graco Paint Sprayer was worn out and needed to be replaced
The O-ring that connects the paint container to the paint sprayer was worn out from previously using it over the past couple of years. I started to notice that air would leak in the container causing the pain sprayer to not spray paint as normal. I would have to squeeze the air out of the container and hold it so the paint would go into t
... Read more
he pump to spray.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
The O-Ring is a blue, rubber ring which is used to provide an airtight seal between connected parts, such as between the diffusion tube and filter cap. If the part is broken due to general wear/fatigue, there will be a leak and it should be replaced. Refer to your make, model and diagrams to ensure this is the best part for you.
The O-Ring is a blue, rubber ring which is used to provide an airtight seal between connected parts, such as between the diffusion tube and filter cap. If the part is broken due to general wear/fatigue, there will be a leak and it should be replaced. Refer to your make, model and diagrams to ensure this is the best part for you.
This is an authentic Graco replacement part that has been sourced from the original manufacturer to be used with paint sprayers. The strainer attaches to the bottom of the pick-up hose assembly. The strainer is used to prevent debris from entering the pump assembly. This item is sold as an individual replacement part.
This is an authentic Graco replacement part that has been sourced from the original manufacturer to be used with paint sprayers. The strainer attaches to the bottom of the pick-up hose assembly. The strainer is used to prevent debris from entering the pump assembly. This item is sold as an individual replacement part.