17N166 Graco Paint Sprayer - Overview
Sections of the 17N166
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
O-ring
PartSelect #: PS12646213
Manufacturer #: 16Y425
This O-ring, also known as a gasket, is a genuine OEM replacement part designed for use in air sprayers. It is a rubber seal with a diameter of approximately 1.5 inches, that sits between the pump and...
$19.31
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The O-ring that was on my Graco Paint Sprayer was worn out and needed to be replaced
The O-ring that connects the paint container to the paint sprayer was worn out from previously using it over the past couple of years. I started to notice that air would leak in the container causing the pain sprayer to not spray paint as normal. I would have to squeeze the air out of the container and hold it so the paint would go into t
... Read more
he pump to spray.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
Read less
Parts Used:
-
Tyler from GRESHAM, OR
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!