Admiral Dryer Switches

Admiral Appliance Parts
Shop By Part Type

Popular Admiral Dryer Switches

Your Price
$30.80
  On Order
Dryer Door Switch
★★★★★
★★★★★
(341)
PartSelect Number PS11741701
Manufacturer Part Number WP3406107
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM switch is comprised of plastic and metal, and features the switch and three wires that comprise the part. Sold individually, this part attaches to the inside of the top end of the front panel. One end attaches to the wiring harness, the other goes through the panel to make contact with the door when the door is closed. Over time, this part can be subject to material fatigue or breakage due to frequent use or rough handling. If it breaks or is defective, you won't be able to start or stop your drying cycle, depending on the position your switch broke in. The easiest way to test this part for functionality is to test it by hand. Push on the black tab that sticks out of the front panel to make contact with your dryer door; if there is no resistance in the tab and it doesn't make a click sound, you may need to replace it.
Fixes these symptoms
  • Door won’t close
  • No heat or not enough heat
  • Shuts off too soon
  • See more...
Installation Instructions
pat from lisbon,, OH
door switch was bad
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service Read more...
Your Price
$30.47
  In Stock
Push-To-Start Switch
★★★★★
★★★★★
(16)
PartSelect Number PS11742178
Manufacturer Part Number WP3977456
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is best to replace this part as a possible solution. Remember to unplug your appliance before beginning the installation process, as safety precaution. For installation instructions and accurate guidance, refer to the diagram provided by the manufacturer.
Fixes these symptoms
Installation Instructions
Dennis from Port Orchard, WA
Broke start switch while moving
Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back panel, put the nob on and it looks as good as new.Turned on the power. Read more...
Your Price
$37.02
  In Stock
Door Switch Assembly
★★★★★
★★★★★
(29)
PartSelect Number PS11741700
Manufacturer Part Number WP3406105
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Fixes these symptoms
Installation Instructions
John from Bethesda, MD
Dryer would stay on after opening the Door. The switch that turns off the dryer when you open the door was not broken.
You open up the lint filter access door and remove the two small screws that hold it to the top of the dryer. Once they are removed, you insert a flat blade screwdriver under front-top of the unit and the top will pop off. Exerting a little pressure towards you will help lift to top off the mounts. There are no other screws to remove.
The new switch comes attached to a clip. You just pull off the old clip and replace it with the new one and discard the old switch.
Read more...
Your Price
$27.14
  In Stock
Door Switch Kit
★★★★★
★★★★★
(19)
PartSelect Number PS1964648
Manufacturer Part Number W10169313
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble, replacing the door switch can solve this appliance problem. The tools needed for replacement are a screw driver and wire strippers. Make sure to attach the two wires to the right two poles of the new switch, to do this you can check the resistance of the switch. Unplug the dryer before installing this part, also refer to the diagram provided by the manufacturer.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Will not shut off
  • See more...
Installation Instructions
Don from Jacksonville, FL
Switch sticking in on position
FIRST unplug dryer from electrical source, CAUTION, the top of this dryer does not open with clips, do not pry on top to open! On the front of the dryer look under the lower panel, and find two screws, one on the left side, and one on the right, remove these screws, and pull slightly down on panel to remove. Behind this panel find two screws holding the door panel, one on the left, and one on the right, remove the left, and support the door panel while removing the right side. Gently pull the bottom of door panel outward, and the clips on top of door panel will unhinge from top, carefully rotate left side of door panel to floor, and note the wire connections on switch, and orientation of switch, then unplug wires, and move door panel to a comfortable working positon. Door must be open to remove switch, then depress the two plastic retaining keepers on each side of switch, and push switch through toward door. Replace with new switch, reconnect the wires, and reassymble in reverse order. Remember, door assymbly must be inserted in dryer top at an angle, and then bottom rotated downward, and bottom panel nylon guildes inserted into door panel bottom. Read more...
Your Price
$46.45
  In Stock
Push-to-Start Switch
★★★★★
★★★★★
(11)
PartSelect Number PS11741493
Manufacturer Part Number WP3398095
This part is used to start the dryer once you have selected a setting on the timer.
Fixes these symptoms
Installation Instructions
Vincent from Pipersville, PA
defective switch
unplug dryer
pull off switch knob
remove two screws at corners of control unit
pull unit toward you to remove
flip over and remove panel
unscrew switch then twist switch to remove from face on control unit
holding new switch next to old, remove wires from old switch and insert onto new switch
place new switch on control unit face and twist into position
Install screws
replace panel, flip back over
position control unit and slide back to lock in place
screw in corners
replace switch knob
plug in dryer
test switch
Read more...
Your Price
$30.36
  In Stock
SWITCH-PTS
★★★★★
★★★★★
(2)
PartSelect Number PS11754549
Manufacturer Part Number WPW10420741
Fixes these symptoms
Installation Instructions
Diane from HGHTN LK HTS, MI
Thought it wad the start switch $23.00
Paid an extra over night fee Friday $24.00 didn't get it until Tuesday afternoon all in all it cost $51.00 then that wasn't the problem. Read more...
Your Price
$40.33
  In Stock
Temperature Selector Switch
★★★★★
★★★★★
(1)
PartSelect Number PS11741508
Manufacturer Part Number WP3399639
This switch allows you to change the cycle settings on your dryer.
Fixes these symptoms
Your Price
$46.59
  On Order
Door Switch
★★★★★
★★★★★
(6)
PartSelect Number PS11750824
Manufacturer Part Number WPW10237959
Fixes these symptoms
Installation Instructions
Ronald from LANCASTER, CA
A piece of cloting snagged and broke the door switch.
Repair job took less than 10 minutes: 1) Unplug Dryer 2) Remove Lint screen and 2 Phillip screws 3) use flat putty knife to depress lid latches while lifting (latches located approx 2 - 3 inches from each side. 4) unplug defective door switch 5) remove 2 Phillip screws that secure the door switch. Reinstall switch repeating the above steps in reverse order and your done. Read more...
Your Price
$62.70
  In Stock
Temperature Switch
PartSelect Number PS11741922
Manufacturer Part Number WP37001164
Fixes these symptoms
Your Price
$48.26
  In Stock
Buzzer, Mini
★★★★★
★★★★★
(1)
PartSelect Number PS11743788
Manufacturer Part Number WP694419

Related Parts