Washer Caps and Lids
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Washer Caps and Lids
Your Price
$283.18
In Stock
Washer Lid
PartSelect Number PS12584356
Manufacturer Part Number W11259006
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- See more...
Installation Instructions
Greg from RICHMOND, VA
Broken lid frame at left hinge.
Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly.
Read more...
Your Price
$18.90
In Stock
Washer Dryer Cap
PartSelect Number PS11750408
Manufacturer Part Number WPW10208398
This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and closing. If the door for your dryer is not properly opening and closing, this cap needs to be replaced immediately. To replace this door hinge bushing, you will need a screwdriver to remove and disassemble the door for your dryer. This door hinge bushing is sold individually, but normally wears at the same rate as the others within your dryer door, so order as many as are needed.
Fixes these symptoms
- Door Sags
- Door won’t close
- Lid or door won’t close
- See more...
Your Price
$16.95
In Stock
Washer Agitator Cap Barrier W/seal
PartSelect Number PS11748113
Manufacturer Part Number WPW10074580
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
Fixes these symptoms
- Does not dispense fabric softener or detergent
- Leaking
- Marks left on clothes
- See more...
Installation Instructions
Kevin from Everett, WA
upper portion of 2-piece agitator didn't spin
Popped the agitator cap with a flathead screwdriver. Removed the dust cap, tearing the o-ring in the process. Removed the bolt that holds the agitator in place, removed the whole agitator. Pulled the top portion of the agitator off, removed the dog housing and all pieces of the broken dog pieces. Replaced them, and put it all back together in reverse order. Pretty straight forward repair. Works great!
Read more...
Your Price
$44.95
In Stock
Washer Pulsator Cap
PartSelect Number PS3525704
Manufacturer Part Number 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Fixes these symptoms
- Marks left on clothes
- Will not agitate
- See more...
Installation Instructions
Kristen from Safford, AZ
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with.
Read more...
Your Price
$172.80
In Stock
Washer Glass Frame Lid Assembly
PartSelect Number PS12171679
Manufacturer Part Number WH44X26695
Presenting the Glass Frame Lid Assembly from GE, a vital component for maintaining the efficiency of your washer. Serving an important function by covering the washer tub opening, it shields inner mechanisms and contributes to the longevity of the appliance. Constructed to meet high quality standards, the glass frame lid assembly is sizeable and durable. Make sure to protect your hands with work gloves during installation for safety. The addition of this top-quality GE product ensures a beneficial step in appliance safeguarding.
Fixes these symptoms
- Lid or door won’t close
- See more...
Your Price
$207.49
In Stock
Washer Glass Lid Upper
PartSelect Number PS12074659
Manufacturer Part Number W11102314
The Whirlpool washer lid is an OEM replacement part designed to fit select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef washing machines. This durable lid covers the washer tub opening, preventing debris and leaks while ensuring safe operation. Damaged or cracked lids can impact washer performance. For proper installation, wear work gloves and refer to your owner’s manual to confirm compatibility.
Fixes these symptoms
- Lid or door won’t close
- See more...
Your Price
$5.95
In Stock
Washer Door Guide Cap
PartSelect Number PS12721288
Manufacturer Part Number DD67-00113B
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on the dishwasher cabinet. It also protects the hardware from moisture, debris, or hard impacts. It is normal for the cap to become damaged or worn down over time due to normal mechanical stress, aging, or accidents. Over time the cap may crack or break, the adhesive backing may wear down or the cover may be unable to stay securely in place. You will need to replace the door cap or the mounting hardware on the exterior panel will be exposed. Simply pull off the faulty cap and snap the new one into place.
Your Price
$225.91
On Order
Washer Lid Assembly
Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished. Read more...
PartSelect Number PS12070901
Manufacturer Part Number W11101059
This washer lid assembly is a genuine replacement part designed to cover the tub opening of select Whirlpool washing machines. It plays a critical role in sealing the washer during operation, preventing water from escaping and ensuring the agitator functions properly throughout the wash cycle. The lid securely latches to maintain safety and efficiency, and its durable construction supports long-term use. It replaces previous versions and is compatible with various Whirlpool models. Common signs that the lid assembly may need replacement include visible cracks, difficulty latching, or general wear. For safe installation, unplug the washer and follow manufacturer guidelines to remove the old lid and secure the new one in place.
Fixes these symptoms
- Lid or door won’t close
- See more...
Installation Instructions
Jonathan from HELENA, AL
Replace Cracked Whirlpool Cabrio Washing Machine Lid
This is a very simple repair. My lid was severely cracked on the back left corner where there seems to be a lot of pressure/torque required to shut the lid. There is a metal L-shaped "tab" that inserts into the lid on both sides of the back edge of the lid. The lid is attached to these metal tabs with two screws for each side. My cracked lid had resulted in the lid breaking off of the metal tab with the screws still anchored into the metal tab. Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished. Read more...
Your Price
$254.11
In Stock
Washer Top Load Glass Frame Lid (diamond Gray)
PartSelect Number PS16874130
Manufacturer Part Number WH10X35298
This glass lid frame assembly is designed for top-load washing machines, providing secure coverage while allowing visibility into the wash cycle. Featuring a modern diamond gray finish, the transparent glass panel lets you monitor progress without interrupting the cycle. Built with durable materials to resist impact and frequent use, it helps prevent water leakage and supports proper lid closure. Replacement may be necessary if the original lid is cracked, broken, or no longer seals properly. Installation should be done with the appliance unplugged to ensure safety.
Fixes these symptoms
- Lid or door won’t close
- See more...
Your Price
$197.95
In Stock
Washer Door Lid Assembly
Special note: you DO NOT need additional hinges as the replacement door comes with them already. To replace the hinges, simply push them out from the back side (i.e. opposite end where they are compressed). Installing new ones is easy, almost too easy to where you think it is not enough, but if they are seated and the door operates it is fine.
Exceptionally easy fix. Was able to do it with two sleeping kids under 3 years old never waking up in less than 5 minutes. 100% satisfied. Read more...
PartSelect Number PS11775881
Manufacturer Part Number AGM75369502
This door lid assembly is a genuine OEM replacement assembly that is compatible with various LG pedestal washers. It includes the door lid, which has a diameter of 19.5 inches, and two white plastic hinge pins. The lid is a protective covering that ensures that the water, clothes, and detergent remain inside the washer during use. It also ensures the safety of users by preventing access to the moving parts of the washer which can cause injuries. Over time the lid may fail due to aging, mechanical stress from opening and closing, or due to accidental damage. If the lid is damaged or otherwise faulty, you will likely have difficulties opening and closing the lid and the washer may be unable to advance through the cycles. It is recommended to avoid using the washer until you have installed a new lid.
Fixes these symptoms
- Lid or door won’t close
- See more...
Installation Instructions
Zach from REYNOLDS, IL
Door Latch Broke causing washer to leak - This was the fix!
Our toddler stood on the handle of the pedestal washer - broke it - but we didn't know how much of a problem this was until the washer started to leak. Well, gravity doesn't work backwards, so I started with assuming the door seal was wrong instead of any drains or hoses. Ordered this part (which was perfect by the way) and fixed it right away. Special note: you DO NOT need additional hinges as the replacement door comes with them already. To replace the hinges, simply push them out from the back side (i.e. opposite end where they are compressed). Installing new ones is easy, almost too easy to where you think it is not enough, but if they are seated and the door operates it is fine.
Exceptionally easy fix. Was able to do it with two sleeping kids under 3 years old never waking up in less than 5 minutes. 100% satisfied. Read more...
Washer Cap or Lid Brands
- Admiral Washer Caps and Lids
- Amana Washer Caps and Lids
- Bosch Washer Caps and Lids
- Crosley Washer Caps and Lids
- Electrolux Washer Caps and Lids
- Frigidaire Washer Caps and Lids
- General Electric Washer Caps and Lids
- Gibson Washer Caps and Lids
- Hotpoint Washer Caps and Lids
- Inglis Washer Caps and Lids
- Kelvinator Washer Caps and Lids
- Kenmore Washer Caps and Lids
- LG Washer Caps and Lids
- Maytag Washer Caps and Lids
- Roper Washer Caps and Lids
- Samsung Washer Caps and Lids
- Tappan Washer Caps and Lids
- Westinghouse Washer Caps and Lids
- Whirlpool Washer Caps and Lids