My Orders
Warming Drawer Parts
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Warming Drawer Parts
This broil element is found on the roof of the oven.
This broil element is found on the roof of the oven.
Installation Instructions
Wayne from Destrehan, LA
Broiler Element quit working
Scarey> First thing you should do is cut off the electricity at the main breaker box. I dam near blowed myself up. It's 220Volt I found out after all hell blew up in my face. I was lucky and didn't get shocked.I shorted out the old broiler element.
So I made the job real easy I called a professional to come install the new broi ... Read more ler element.
I suggest you put a big red paper in each box that says turn off the power first. If your not sure how to do that call a pro.
So I made the job real easy I called a professional to come install the new broi ... Read more ler element.
I suggest you put a big red paper in each box that says turn off the power first. If your not sure how to do that call a pro.
Read less
If Drawer Does Not Fit Onto New Slides Then A New Drawer Will Have To Be Ordered By Model #.
If Drawer Does Not Fit Onto New Slides Then A New Drawer Will Have To Be Ordered By Model #.
Installation Instructions
Jennifer from MCKINNEY, TX
Replaced drawer rails, the drawer will not slide onto the rails. Repair is not complete!
Calling an appliance company to put the drawer on the new rails and reinstall the drawer. Totally frustrated!
Choose the desired heat setting on a warming drawer with this black control knob. It fits over the thermostat shaft and turns the control to the selected position. The marked face helps the user see and adjust the warming level. Replacement may be needed when the original knob is cracked, loose, worn, or missing. Turn off the appliance and allow it to cool before installation. Compare the shaft opening, pointer position, and overall shape with the old knob to confirm proper alignment before pressing it into place.
Choose the desired heat setting on a warming drawer with this black control knob. It fits over the thermostat shaft and turns the control to the selected position. The marked face helps the user see and adjust the warming level. Replacement may be needed when the original knob is cracked, loose, worn, or missing. Turn off the appliance and allow it to cool before installation. Compare the shaft opening, pointer position, and overall shape with the old knob to confirm proper alignment before pressing it into place.
This part will trip the controls if your appliance gets too hot or if it isn't working properly. It is a safety feature.
This part will trip the controls if your appliance gets too hot or if it isn't working properly. It is a safety feature.
Installation Instructions
Christy from Paso Robles, CA
After using the "self-clean" option, the panel blew out and the door remained locked. We knew we burnt fuses but didn't know which ones. We had a technician come out and tell us which ones. ($70.00) He quoted us a price of $495.00 for parts and labor. We did the repair ourselves and cost us $157
The hardest part was getting the oven out. The double oven is pretty heavy.
The screws were on the sides under a removable strip. Have a table about the same height as the base of the oven. It was easy to slide it straight over to the table.
The schematics are on top of the oven. Although you probably won't ... Read more need them for the parts we replaced. When you have the oven out and the back panel removed, it is easy to identify the exact parts you are replacing. The part numbers were the same on the fuses. The thermostat was a simple pull apart. Then undo the 2 screws inside the oven. The heat sensor required some figuring. There is a pin that holds it in place in a plastic casing. We used a small flat head screw driver to push the pin flat to loosen it from the casing. This part was behind the digital panel and the only one that didn't require the oven coming out.
We would easily do this project again and glad we did. We saved $340.00 by doing it ourselves. I am glad I found PartSelect.com
Make sure you turn off the breaker to the appliance first. You don't want any electrical surprises. The hospital bill would be more expensive than the repairman !!
The screws were on the sides under a removable strip. Have a table about the same height as the base of the oven. It was easy to slide it straight over to the table.
The schematics are on top of the oven. Although you probably won't ... Read more need them for the parts we replaced. When you have the oven out and the back panel removed, it is easy to identify the exact parts you are replacing. The part numbers were the same on the fuses. The thermostat was a simple pull apart. Then undo the 2 screws inside the oven. The heat sensor required some figuring. There is a pin that holds it in place in a plastic casing. We used a small flat head screw driver to push the pin flat to loosen it from the casing. This part was behind the digital panel and the only one that didn't require the oven coming out.
We would easily do this project again and glad we did. We saved $340.00 by doing it ourselves. I am glad I found PartSelect.com
Make sure you turn off the breaker to the appliance first. You don't want any electrical surprises. The hospital bill would be more expensive than the repairman !!
Read less
Illuminate the cooktop with a replacement range hood lamp assembly. The combined bulb, socket, and housing mount beneath the hood to provide light while cooking or cleaning. Replacement may be needed if the light remains off, flickers after the bulb is secured, or has a damaged socket or cover. Check the switch, power supply, wiring connection, and bulb before deciding the full assembly has failed. Match the replacement to the complete hood model and inspect the product image for the correct connector and mounting shape. Disconnect electrical power, let the lamp cool completely, wear gloves, and follow the appliance diagram during installation.
Illuminate the cooktop with a replacement range hood lamp assembly. The combined bulb, socket, and housing mount beneath the hood to provide light while cooking or cleaning. Replacement may be needed if the light remains off, flickers after the bulb is secured, or has a damaged socket or cover. Check the switch, power supply, wiring connection, and bulb before deciding the full assembly has failed. Match the replacement to the complete hood model and inspect the product image for the correct connector and mounting shape. Disconnect electrical power, let the lamp cool completely, wear gloves, and follow the appliance diagram during installation.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Hood would take 2 filters.
Hood would take 2 filters.
Installation Instructions
richard from HOPATCONG, NJ
the lens did not fit It did not fit in the hole of the range top
I has to file the bottom edge on a slight angle so the lens would fit in the hole. Also I had to file the top edge cause it had little tabs and and also had to file the edge below the top of the lens then it would snap in so I have to say the woman I talked to said she guaranteed me it would fit and it didn't
