Maytag Warming Drawer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Warming Drawer Parts
Your Price
$68.86
In Stock
Maytag Warming Drawer Drawer Slide
PartSelect Number PS11749868
Manufacturer Part Number WPW10188461
If Drawer Does Not Fit Onto New Slides Then A New Drawer Will Have To Be Ordered By Model #.
Installation Instructions
Jennifer from MCKINNEY, TX
Replaced drawer rails, the drawer will not slide onto the rails. Repair is not complete!
Calling an appliance company to put the drawer on the new rails and reinstall the drawer. Totally frustrated!
Read more...
Your Price
$50.56
In Stock
Maytag Warming Drawer Thermal Fuse
2. The warming slide-out drawer was removed. Note: There was damage to the left side plastic release lever--it was completely melted and unusable. (The damage was probably a manufacturer defect that existed when the unit was originally installed.) The right side plastic release mechanism was OK. After applying a little leverage to wiggle the drawer horizontally, the drawer was removed successfully.
3. The four (4) Phillips-head screws holding the warming drawer in the cabinet were removed to allow the unit to slide forward to expose the electrical box.
4. The five (5) Phillips-head screws holding the electrical box cover were removed to allow access to the thermal fuse.
5. The single (1) Phillips-head screw holding the fuse in place was removed. This allowed the connectors to be removed while noting which connector was closest to the red dot on the fuse.
6. The resistance was measured on the old fuse and it was found to be an open circuit, i.e., the fuse had been activated confirming that a new fuse was needed.
7. The connectors were installed on the new thermal fuse and the fuse secured again with the Phillips-head screw.
8. Electric power was again enabled to confirm that the unit would turn on.
9. The box cover was re-secured using the five Phillips-head screws.
10. The warming drawer unit was repositioned in the cabinet and the four Phillips-head screws were reinstalled to hold the unit in place.
11. The warming drawer was reinstalled after minor lubrication was applied to the slide mechanism to facilitate easier opening and closing of the drawer. Read more...
PartSelect Number PS1488774
Manufacturer Part Number 9763126
Installation Instructions
Jasper from LIVONIA, MI
Warming drawer would not turn on.
1. Electricity was disabled to the warming drawer.2. The warming slide-out drawer was removed. Note: There was damage to the left side plastic release lever--it was completely melted and unusable. (The damage was probably a manufacturer defect that existed when the unit was originally installed.) The right side plastic release mechanism was OK. After applying a little leverage to wiggle the drawer horizontally, the drawer was removed successfully.
3. The four (4) Phillips-head screws holding the warming drawer in the cabinet were removed to allow the unit to slide forward to expose the electrical box.
4. The five (5) Phillips-head screws holding the electrical box cover were removed to allow access to the thermal fuse.
5. The single (1) Phillips-head screw holding the fuse in place was removed. This allowed the connectors to be removed while noting which connector was closest to the red dot on the fuse.
6. The resistance was measured on the old fuse and it was found to be an open circuit, i.e., the fuse had been activated confirming that a new fuse was needed.
7. The connectors were installed on the new thermal fuse and the fuse secured again with the Phillips-head screw.
8. Electric power was again enabled to confirm that the unit would turn on.
9. The box cover was re-secured using the five Phillips-head screws.
10. The warming drawer unit was repositioned in the cabinet and the four Phillips-head screws were reinstalled to hold the unit in place.
11. The warming drawer was reinstalled after minor lubrication was applied to the slide mechanism to facilitate easier opening and closing of the drawer. Read more...
Your Price
$11.77
Special Order
Your Price
$74.08
Special Order
Your Price
$56.33
Special Order
Your Price
$125.62
In Stock
Your Price
$50.56
Special Order
Your Price
$87.58
Special Order
Your Price
$53.20
Special Order
Maytag Warming Drawer Serving Pan Support Rail
PartSelect Number PS3632853
Manufacturer Part Number W10409138
The serving pan support rail holds and supports the serving pan or pans inside the drawer.
Your Price
$225.65
Special Order
Maytag Warming Drawer Appliance Types
Related Maytag Warming Drawer Parts
Popular Maytag Warming Drawer Models
Below are the most popular Maytag Warming Drawer models we have. Enter your model number in the search box to find your model.