Southland Parts

This recoil starter assembly is supplied by the original manufacturer for use in tillers. It includes a plastic starter housing, metal mounting plate, starter pulley with recoil springs, grip handle, pull rope, and fasteners. When the starter rope/cord is pulled, the crankshaft rotates, and this begins the combustion process that allows the engine to run. If the starter assembly is not engaging or you have difficulties with pulling and retracting the rope rope, the most likely causes are a worn-down rope, damaged housing, or broken recoil spring. Loosen and remove the fasteners that hold the assembly to the engine. Pull off the assembly and position the new one in its place. Secure the assembly to the engine and test your equipment by pulling the rope to check that it can engage and start the equipment.

Kit, Internal Filter, Pre-Filter

This forward drive belt is a genuine replacement component designed to restore smooth and reliable operation to compatible tillers. Known as a 7PK597 multi-rib poly V belt, it connects the engine to the drive system, enabling forward motion and traction. Made from durable rubber, it resists wear and slippage, ensuring consistent performance in demanding outdoor conditions. If your tiller is experiencing reduced traction, slipping, or a non-functioning drive system, replacing the belt may resolve these issues. Installation involves accessing the drive assembly and securing the new belt in place. This part is compatible with select Powermate and Southland tiller models—verify fit before installation.

This OEM plastic throttle trigger and rubber-insulated cable in your lawn equipment control the fuel and air flow to the engine, determining its speed and power. They are typically located on the handle, with the cable connecting to the carburetor. If these parts are broken, you will notice an unresponsive trigger, fixed engine speed regardless of trigger position, or difficulty starting or stopping the engine. To remove the throttle trigger and cable, consult your user manual for specific instructions. Remember to turn off and cool down the machine, disconnect the spark plug wire, and use a screwdriver to remove any fasteners on the trigger. Trace the cable from the trigger to the carburetor and release any clamps or clips holding the cable in place. Finally, pull the throttle trigger away from the handle and remove the cable from its housing. Please keep in mind that this trigger and cable set does not come with the housing or other components.

This replacement tube is an authentic component which is supplied by the original equipment manufacturer for use with Southland earth augers. It is the special kit that the fuel travels through. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Please make sure to check appropriate diagrams for your model for the exact location and the correct application of this component. Keep in mind this high-quality fuel line kit is sold as an individual item.

This is a genuine OEM supplied replacement wheel that is specially manufactured for use on Powermate and Southland rear tine tillers. It is the right wheel that keeps the unit mobile for easy transportation. This high-quality wheel is sold individually, it consists of a metal rim and a durable rubber tire. Please note the left wheel and the hardware to secure these parts are all sold separately.

A reverse drive belt is used within outdoor power equipment within the transmission to enable the reverse gear functionality and allow the user to move the equipment backward. This reverse drive belt is a 5Pk740 belt, meaning it is a multi-ribbed V-profile and measures 740mm in length/circumference. This belt is made of high-quality materials and connects directly to the reverse tensioner pulley in various models of tillers and is sold as an individual part. Over time and due to heat, friction, and stretching, this belt can eventually wear down. If you notice poor performance from your tiller when reversing or hear squealing and other unusual noises, inspect both drive belts for any signs of visible damage. To replace this drive belt, make sure the engine is cool and disengage the spark plug cap. Use a wrench to remove the belt guards on top and below the belt, if necessary. Then, using 2 wrenches, disconnect and remove the securing idler bolt and any washers, after which you can remove the belt through the bottom of the unit. Check to make sure the forward drive belt is in good condition before you install the new reverse drive belt. Pull the reverse drive belt up through the bottom of the unit and install it to the appropriate pulleys and tension wheel, followed by any washers and the securing bolt which you will need to tighten. Then simply replace the belt guards if applicable.

This is a Powermate, Southland, and Airstream replacement part directly sourced from the manufacturer for use in edgers. The air cleaner cover goes next to the air cleaner element. It might require a screwdriver and a socket set to replace this item. It will need to be replaced if it breaks. This part is made of a durable material and is available individually.

This housing is what directly connects the rest of the air filter housing to the equipment. This genuine OEM part is made of high-quality plastic and is compatible with several different models of edgers, but the hardware to fasten this housing to your equipment is sold separately. If there are any cracks or the fit and seal for the air filter housing is not tight enough, the housing will need to be replaced because it seals dust, dirt, and debris from entering your equipment, ensuring better health and performance. The cleaner your air filter, the better and longer your equipment will run and stay running, without need for costlier repairs. This housing is typically fastened to the side of the engine but consult with the user manual for your model for the appropriate installation location.