S-RTT-196 (E) Southland Tiller - Overview

This clutch cable is designed to engage and disengage the blades of a tiller and its forward and reverse drive functions and is compatible with various makes and models of tiller. Sold as an individual part, this clutch cable is insulated with a durable and high-quality rubber, and the housing and other associated hardware are sold separa...Read moretely. This cable will typically be connected to the clutch lever on the handlebar of your tiller, and a mechanism near the engine, but depending on your tiller model it may be configured differently. Over time and through extended use, this cable can fray or break, which requires replacement. To replace this cable, you will need pliers and an appropriate wrench kit for your tiller model.

This is a genuine OEM supplied replacement wheel that is specially manufactured for use on Powermate and Southland rear tine tillers. It is the right wheel that keeps the unit mobile for easy transportation. This high-quality wheel is sold individually, it consists of a metal rim and a durable rubber tire. Please note the left wheel and the hardware to secure these parts are all sold separately.

This wheel is a genuine OEM part for various models of tillers but is only for the left side of the tiller. Used for moving the tiller around, this wheel measures 13-inches high, 5-inches wide and the rim is 6-inches and made of high-quality metal surrounded by the rubber tire. To replace this wheel, remove the securing hardware on the ou...Read moretside of the rim, slide off the old wheel, and replace the wheel and the hardware. This wheel is sold as an individual part and does not include the necessary hardware to secure it.

This forward drive belt is a genuine replacement component designed to restore smooth and reliable operation to compatible tillers. Known as a 7PK597 multi-rib poly V belt, it connects the engine to the drive system, enabling forward motion and traction. Made from durable rubber, it resists wear and slippage, ensuring consistent performan...Read morece in demanding outdoor conditions. If your tiller is experiencing reduced traction, slipping, or a non-functioning drive system, replacing the belt may resolve these issues. Installation involves accessing the drive assembly and securing the new belt in place. This part is compatible with select Powermate and Southland tiller models—verify fit before installation.

A reverse drive belt is used within outdoor power equipment within the transmission to enable the reverse gear functionality and allow the user to move the equipment backward. This reverse drive belt is a 5Pk740 belt, meaning it is a multi-ribbed V-profile and measures 740mm in length/circumference. This belt is made of high-quality mater...Read moreials and connects directly to the reverse tensioner pulley in various models of tillers and is sold as an individual part. Over time and due to heat, friction, and stretching, this belt can eventually wear down. If you notice poor performance from your tiller when reversing or hear squealing and other unusual noises, inspect both drive belts for any signs of visible damage. To replace this drive belt, make sure the engine is cool and disengage the spark plug cap. Use a wrench to remove the belt guards on top and below the belt, if necessary. Then, using 2 wrenches, disconnect and remove the securing idler bolt and any washers, after which you can remove the belt through the bottom of the unit. Check to make sure the forward drive belt is in good condition before you install the new reverse drive belt. Pull the reverse drive belt up through the bottom of the unit and install it to the appropriate pulleys and tension wheel, followed by any washers and the securing bolt which you will need to tighten. Then simply replace the belt guards if applicable.

This manufacturer-supplied replacement part is designed for Southland and Powermate rear tine tillers. The clutch rod is an important component which controls the forward motion of the unit. It is an identical replacement for a missing or a faulty hardware that was installed on a new equipment. To ensure the exact location and the correct...Read more installation, refer to the diagrams of your specific model. Keep in mind this high-quality clutch rod is made of a durable metal and is sold individually. You will need pliers to remove the old part and attach the new one.

This is a genuine replacement part sourced from the original manufacturer for use with rear tine tillers. The special oil seal is used to prevent transmission fluid leaks where the tine axle exits the transmission case. This item is available as an individual replacement part, please see illustrated diagram for related items.

This is an authentic replacement part manufactured for use with Southland rear tine tillers. The special filter is commonly used to prevent contaminants from entering the engine's intake. This fuel filter is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part manufactured for use with garden tillers. The clutch rod spring is used to return the clutch lever to the off position when the lever is released. This clutch rod spring is sold as an individual replacement part, please see model diagram for associative part.

This is an original Powermate replacement part. The lock pin is designed by the manufacturer for use in rear tine tillers. This part is made of metal, and is generally used in securing components on a shaft. You may require pliers when replacing this item. This part is sold individually.

Designed for rear-tine tillers, this forward drive pulley plays a key role in the transmission by transferring engine power to move the machine forward during operation. Built from durable materials to handle the high torque and load of tilling, it helps ensure smooth, reliable drive engagement in demanding soil conditions. This pulley is...Read more ideal for replacing a worn or damaged drive component to restore consistent forward motion and dependable tiller performance.