My Orders
Samsung Range Switches
GET YOUR OFFICIAL Samsung PARTS TO ENSURE VICTORY
Popular Samsung Range Switches
The control switch turns the surface element on and off and controls how much heat the element produces.
The control switch turns the surface element on and off and controls how much heat the element produces.
This surface element triple burner infinite switch, or regulator control, is located in the control panel of your range oven. It is responsible for turning the surface element on or off and adjusting its heat. If this switch or regulator is broken, you might notice the burner heating uncontrollably or not heating at all. Please remember that genuine OEM replacement part is designed for triple burners. Your range model may use various types of switches, so be sure to choose the correct one when making your purchase.
This surface element triple burner infinite switch, or regulator control, is located in the control panel of your range oven. It is responsible for turning the surface element on or off and adjusting its heat. If this switch or regulator is broken, you might notice the burner heating uncontrollably or not heating at all. Please remember that genuine OEM replacement part is designed for triple burners. Your range model may use various types of switches, so be sure to choose the correct one when making your purchase.
Installation Instructions
Jimmie D. from THOMPSON, MO
The triple burner switch would only stay on the highest setting.
I removed the control panel with a Phillips screwdriver and unplugged the burner switch and replaced the new switch and put the control panel back in place and turned on the burner and it worked as it should.i realized that I only would have only had to remove the 4 screws on the bottom of the control panel. All I would have had to do was
... Read more
just take those 4 screws out and remove the switch control knob and the two screws that held the switch in. Am very happy with the results
Read less
This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft. The burner switch is responsible for turning the surface element on and off and controlling the amount of heat that is produced by the surface heating elements on the stove. The most common sign that your element control switch is faulty is if the burner will only turn on high heat. Other signs of failure include difficulty adjusting the control knob, failure to produce heat, and the burner not shutting off.
This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft. The burner switch is responsible for turning the surface element on and off and controlling the amount of heat that is produced by the surface heating elements on the stove. The most common sign that your element control switch is faulty is if the burner will only turn on high heat. Other signs of failure include difficulty adjusting the control knob, failure to produce heat, and the burner not shutting off.
Installation Instructions
Larry from Longview, TX
Both front burners would go to full heat and not adjust to a lower setting
Turned off circuit breaker, unplugged from wall. Removed dials from front of range. Removed back top panel, and removed Phillips screws holding the associated switches to the front panel. Installed new switches and moved the wiring connectors from old to new switches. Replaced the back panel and front dials. Restored power and tested. So
... Read more
simple even an old phone guy could do it…
Read less
This is a dual element switch that is made for use within Samsung ranges. This switch is necessary to turn the heating elements on and off, and control how hot they get. Over time and with more frequent use, this element switch can fail, however, it can also break if it is damaged by a power surge or food contamination. To replace this switch, you will need a screwdriver to access it and a set of pliers to remove the wires connected to it. This switch is sold individually, so be sure to check how many switches are not working properly before ordering.
This is a dual element switch that is made for use within Samsung ranges. This switch is necessary to turn the heating elements on and off, and control how hot they get. Over time and with more frequent use, this element switch can fail, however, it can also break if it is damaged by a power surge or food contamination. To replace this switch, you will need a screwdriver to access it and a set of pliers to remove the wires connected to it. This switch is sold individually, so be sure to check how many switches are not working properly before ordering.
Installation Instructions
Jeffrey from Hooksett, NH
Dual burner only operates on high, no matter the setting
Followed video at the link below.
https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open. Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open. Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
Installation Instructions
Lynn from LOUISVILLE, KY
Microwave would not start when door closed. Sometimes you could push in or jiggle door and it would work for awhile and then it woud stop again. I knew it eas a door switch issue but wasn't certain which of the 3 or the body latch itself.
I removed the body latch assembly and found the bottom micro switch (NC) terminal burnt and loose. I replaced and working perfectly fine now. Easy diagnose and easy repair.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This surface element control switch (part number DG44-01004A) is for ranges. Surface element control switch DG44-01004A turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
This surface element control switch (part number DG44-01004A) is for ranges. Surface element control switch DG44-01004A turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
