Roper Range Knobs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Roper Range Knobs
Your Price
$20.00
In Stock
Roper Range Surface Burner Knob
PartSelect Number PS11740686
Manufacturer Part Number WP307458
This knob is sold individually.
Installation Instructions
Louise from Austin, TX
Broken knobs
I removed the existing knobs and popped the new ones into their place! It was aggravating that I could not find a local source to purchase replacement knobs, so I was very glad to discover PartSelect. Instead of a $1000 replacement cooktop, I replaced the knobs for less than a tenth the cost.
Read more...
Your Price
$26.64
In Stock
Roper Range Control Knob
PartSelect Number PS11745571
Manufacturer Part Number WP8273104
This knob accepts a D-shaped shaft. Sold individually.
Installation Instructions
Charlaine from Romeoville, IL
the part that fits on the stem to turn the knob had broken. I tried to tape it together, but that did not work.
since it was the control knob, all I had to do was to push it right onto the stem, and it was finished. Using the web site to find the correct item was very easy.
Read more...
Your Price
$13.56
In Stock
Roper Range Control Knob
PartSelect Number PS11745570
Manufacturer Part Number WP8273103
This is a control knob, sometimes known as a valve knob, for a range, oven, or stove. It allows you to control the temperature of the surface burner on your appliance. It is made of plastic and is black in color. This knob accepts a D-shaped shaft. No tools are required for completing this repair. Simply pull the knob straight off the post until it pops off, and reverse the process to reinstall the new knob. This is an OEM replacement part and is sold individually. You may want to consider replacing all of the knobs at once to avoid wear and maintain a consistent appearance.
Installation Instructions
Marie from ELLIJAY, GA
Your Price
$24.04
In Stock
Roper Range Surface Burner Knob
PartSelect Number PS11740986
Manufacturer Part Number WP3196232
Sold individually. This white knob accepts a double-flat shaft.
Your Price
$37.33
In Stock
Roper Range Surface Burner Knob
PartSelect Number PS11741145
Manufacturer Part Number WP330190
This part is sold individually. The surface burner knob is black and chrome in color. It measures approximately 1-1/2 inches in diameter. The surface burner knob is for ranges and allows you to control the temperature of the surface burner. If your knob has broken or gone missing it will need to be replaced. This repair requires no tools to complete. You simply remove the old knob by pulling it off and press the new knob into place by lining it up with the shaft. This is an OEM genuine part.
Installation Instructions
Mark from Albuquerque, NM
My stove top is 30 years old. I was down to one knob. I looked up the part by brand and age. the pictures were accurate and the size dimensions were perfect.
Pulled off the one remaining knob, installed the new ones. One minute and the stove works perfectly.
Read more...
Your Price
$21.54
In Stock
Roper Range Burner Knob
PartSelect Number PS11747470
Manufacturer Part Number WP98006102
This white knob take a D-shaped shaft. Sold individually.
Your Price
$24.50
In Stock
Roper Range Surface Burner Knob
they worked great. I love them. Thank you. Read more...
PartSelect Number PS11740985
Manufacturer Part Number WP3196231
Sold individually. This knob accepts a double-flat shaft.
Installation Instructions
Loretta M. from Modesto, CA
The control knobs broke over time. So I couldn't control the burners and I tried some uiversal knobs from Lowe's that was a disaster. I ordered the right knobs and they work great.
I simply put the control knobs on the shaft andthey worked great. I love them. Thank you. Read more...
Your Price
$14.62
In Stock
Your Price
$19.94
In Stock
Your Price
$20.97
In Stock
Roper Range Clock Knob
PartSelect Number PS11740808
Manufacturer Part Number WP3169181
Sold Individually. Order quantity required.
Installation Instructions
Jody from Moweaqua, IL
Heating element for oven broke in two.
Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!
Read more...
Related Roper Range Parts
- All Roper Range parts
- Roper Range Doors
- Roper Range Drip Bowls
- Roper Range Elements and Burners
- Roper Range Handles
- Roper Range Hardware
- Roper Range Hinges
- Roper Range Igniters
- Roper Range Insulations
- Roper Range Racks
- Roper Range Seals and Gaskets
- Roper Range Switches
- Roper Range Valves
- Roper Range Wire Plugs and Connectors
