Norge Range Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Norge Range Switches
Your Price
$46.34
In Stock
Norge Range Infinite Switch - 6 Inch
PartSelect Number PS11744486
Manufacturer Part Number WP7403P238-60
Does your appliance need a quick fix? Our GE Controller Assembly is here to help. This genuine GE part is the heartbeat of your appliance, keeping everything running smoothly and efficiently. It's specifically designed to fit your GE appliances perfectly, meaning you won't have to worry about any compatibility issues. This precision-crafted part doesn?t just improve appliance performance - it enhances its life and reliability too. The GE Controller Assembly is made with sustainability in mind, promising durability that makes for a lasting solution to your appliance woes. When you choose to repair your appliance with this GE part, you're choosing superior results and reliability. It's a simple, effective way to restore your appliance to its former glory. So why wait? Lay your worries to rest and boost your appliance's efficacy with the GE Controller Assembly.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Robert from Monroe, NJ
Burners were intermittently working.
It turns out that the 6" and 8" burners we actually broken and the infinite switch for the 8" burner was not working properly. These we very simple replacements. You just need to note the numbers on the original burners to make sure that you use the same numbers on the bottom of the burners so that they install in the same slots. The wires on the infinite switch match and this takes less than 5 minutes to remove the back of the stove top and the front switch handle. Simple replace the infinite switch and the burners and whoowhooo ,,.... the fix is done.
Read more...
Your Price
$91.72
In Stock
Norge Range Infinite Switch
PartSelect Number PS11749684
Manufacturer Part Number WPW10179654
Introducing the Infinite Switch Surface Element Control Switch, a genuine OEM part that remarkably enhances the performance of your Whirlpool appliance. Praised for its dependable function, it operates to turn your surface element on and off, deftly controlling the heat it produces. This versatile part is designed for ranges and contributes to a rich cooking experience. Informational tip: before installation, ensure your range is unplugged or your house circuit breaker is off to ensure a safe and efficient setup. Do remember to wear work gloves for your protection during this procedure. Turn to this part to revitalize the operation of your Whirlpool range.
Your Price
$100.51
Special Order
Your Price
$135.24
Special Order
Norge Range Infinite Switch
PartSelect Number PS11743997
Manufacturer Part Number WP74002328
This surface element control switch is a key component in select ranges, responsible for managing the operation of the cooktop heating elements. Also known as an infinite switch or indicator switch, it allows users to turn the element on and off and adjust the heat level with precision. The switch communicates selected settings to the appliance’s control board, regulating power flow to ensure accurate temperature control. This OEM part is designed for reliable performance and compatibility with various models. Installation should be performed with the appliance unplugged and protective gloves worn to ensure safety.
Your Price
$68.86
In Stock
Norge Range Igniter Switch
PartSelect Number PS11744489
Manufacturer Part Number WP7403P279-60
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$86.27
On Order
Norge Range Selector Switch
PartSelect Number PS11744488
Manufacturer Part Number WP7403P255-60
This selector switch allows users to choose operating modes or cycles by directing electrical power to the appropriate components. Designed for smooth rotation and dependable contact, it is commonly replaced when selections fail to engage or operate correctly.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Myron from Wolf Point, AL
Inner radiant element did not work
Removed the top after some trouble(must pull stove out all the way)rplaced parts
Read more...
Your Price
$65.73
In Stock
Norge Range Burner Spark Ignition Switch
The switch slid off the burner valve stem easily but removing the wires I had to pull with the pliers. There seamed not to be a wire release that I could see.
Replacing the wires was no problem. They slid into place by just pushing them in. Assembly was the reverse. Read more...
PartSelect Number PS11744485
Manufacturer Part Number WP7403P190-60
Sold individually.
Installation Instructions
Roman from West Caldwell, NJ
Igniter Switch on the burner was constantly on
To get to the switch I had to remove the knobs and the front panel of the burner valves. There were some dozen screws, top and bottom holding the panel in-place.The switch slid off the burner valve stem easily but removing the wires I had to pull with the pliers. There seamed not to be a wire release that I could see.
Replacing the wires was no problem. They slid into place by just pushing them in. Assembly was the reverse. Read more...
Your Price
$52.67
Special Order
Your Price
$88.39
In Stock
Norge Range Surface Element Control Switch
PartSelect Number PS12347323
Manufacturer Part Number W11122006
The surface element control switch turns the surface element on and off and controls how much heat the element produces.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
David from Bellefonte, PA
burner would not work
slide stove out unplugged it took six screws out put new one in transfered wires pluged back in and it works thank you
Read more...
Your Price
$76.17
In Stock
Norge Range Igniter Switch (series 16)
PartSelect Number PS11744491
Manufacturer Part Number WP7403P287-60
This switch is used with gas ranges and ovens. The part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Herb from Sumas, WA
One burner was not igniting .. no clicking sound .. no spark.
On this range, the switch at any one burner causes the igniters to spark on all four burners. However, there was no spark anywhere when I turned the knob for the front right burner. This indicated a fault in the switch on that knob. Very important to start by unpluging the power cord (I got zapped trying to skip that part!) Then remove all four burners, by turning them counterclockwise and lifting. Remove all igniter wires and set the burners aside. At the edge of each of the burner holes is a screw. Remove all four of these screws, then you can pry the cooktop up and remove it. Pull all four knobs off, and remove the four screws attaching the cover behind the knobs (two on top and two below (above oven door). This exposes the igniter switches. Slide the broken switch off the shaft, and remove the wires. (There is a small release tab at each pole of the switch. Depress it with a small screw driver and the wires can be pulled out.) Push the wires into the new switch, slide it into place, and put everything back together. Solved my problem!
Read more...