Murray Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Murray Trimmer Parts
Your Price
$21.42
In Stock
Murray Trimmer Fuel Tank Assembly
PartSelect Number PS9118299
Manufacturer Part Number 753-06183
This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Erik from ROBERTSDALE, AL
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Read more...
Your Price
$20.88
In Stock
Murray Trimmer Bump Head Knob
PartSelect Number PS9306452
Manufacturer Part Number 791-153066B
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning.
A troubleshooting tip is to tap the part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.
Fixes these symptoms
- Cutting line does not come out
- See more...
Your Price
$6.40
In Stock
Murray Trimmer Carburetor O-ring
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues. Read more...
PartSelect Number PS9118815
Manufacturer Part Number 753-06185
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
Installation Instructions
Ricardo from FORT WORTH, TX
Trimmer Would Not Start
The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my garage and replaced it. It took a few pulls to get it started, but ran very smooth. Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues. Read more...
Your Price
$11.39
In Stock
Murray Trimmer Spark Plug
PartSelect Number PS10009739
Manufacturer Part Number 753-06847
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.
Your Price
$6.40
In Stock
Murray Trimmer Carburetor Gasket
PartSelect Number PS9119051
Manufacturer Part Number 753-06253
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
Installation Instructions
john from SHARPSVILLE, PA
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines onto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read more...
Your Price
$7.30
In Stock
Murray Trimmer Head Fixed Line Bt
PartSelect Number PS10009817
Manufacturer Part Number 753-08170
This genuine OEM glide cap, is also referred to as a fixed line head. It protects the cutting line of your string trimmer and prevents it from coming into contact with sidewalks or curbs. Housing the cutting head assembly, it guides and helps the trimmer smoothly glide along the edges without causing damage to the line or the machine. The glide cap is typically found at the bottom end of the trimmer head, where the cutting line extends. The cap is made out of plastic and wears out over time, especially when it rubs against the ground. You may also notice that the string feeds outside of the head uncontrollably. To remove the glide cap, simply depress its locking tabs on each side and pull it away from the cutting head. Install the new glide cap by aligning it with the correct notches on the trimmer, pushing it into place, and using a screwdriver to secure the tabs. Please bear in mind that the glide cap is sold separately from the rest of the cutting head assembly.
Your Price
$6.40
In Stock
Murray Trimmer Aircleaner Filter
PartSelect Number PS9121804
Manufacturer Part Number 753-06417
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.
Your Price
$35.70
In Stock
Murray Trimmer Primer And Hose Assembly
PartSelect Number PS9150700
Manufacturer Part Number 791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages.
If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor.
This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$14.83
In Stock
Murray Trimmer Head Asm Fixed Lin
PartSelect Number PS10009816
Manufacturer Part Number 753-08169
Discover the cutting-edge MTD Head Assembly, uniquely designed to help maintain the high performance of your trimmer for longer. The Fixed Lin Head Assembly is renowned for its durability and efficiency, making it an asset for any trimmer user. It plays an indispensable role in the functionality of your device, providing seamless operation. Specially built by MTD, this kit ensures precise fitting and uncompromised performance, putting it a class above standard parts. If you're seeking a long-lasting solution to your trimmer repair needs, investing in an MTD Fixed Lin Head Assembly may be the smart choice. When it comes to quality and performance, you can trust MTD to deliver unmatched excellence. This is the commitment that MTD assures with every product like this cutting head assembly. Equip your trimmer with this MTD component for improved performance and reliability.
Your Price
$29.57
In Stock
Murray Trimmer Line Spool
PartSelect Number PS9119496
Manufacturer Part Number 753-1155
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
Murray Trimmer Appliance Types
Related Murray Trimmer Parts
- Murray Trimmer Belts
- Murray Trimmer Control Cables
- Murray Trimmer Deflectors and Chutes
- Murray Trimmer Hardware
- Murray Trimmer Pulleys
- Murray Trimmer Spark Plugs
- Murray Trimmer Springs and Shock Absorbers
- Murray Trimmer Switches
Popular Murray Trimmer Models
Below are the most popular Murray Trimmer models we have. Enter your model number in the search box to find your model.
- M2510 String Trimmer
- M2510 String Trimmer
- M2510 String Trimmer
- M2510 String Trimmer
- M2500 String Trimmer
- MS2550 String Trimmer
- TM6000x8C String Trimmer
- MS2560 String Trimmer
- MS2560 String Trimmer
- MS2560 String Trimmer
- TM6000x5A String Trimmer
- TM6000x8NC String Trimmer
- TM5000x89B String Trimmer
- M2550 Trimmer
- M2550 String Trimmer
- M2560 Trimmer
- TM6100x8B String Trimmer
- TM6100x5NA String Trimmer
- TM6000x31B String Trimmer
- 41BDZ20C768 Murray String Trimmer Model 41BDZ20C768 Parts