This suspension rod kit is a genuine OEM kit specially designed for washing machines. Each kit includes a set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods are responsible for supporting the washer tub and allowing it to move freely during the wash and spin cycles while minimizing vibrations and noise. The suspension r...Read moreods, balls and bushings may fail over time due to cracks, breaks, or excessive wear. If the suspension rod kit is faulty, you will likely notice excessive vibration or shaking during the spin cycle, loud banging noises, or the washer not balancing properly.
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
This washer lid lock assembly is designed to ensure safe and efficient operation of top-loading washing machines by securely locking the lid during wash and spin cycles. It prevents the machine from running when the lid is open, reducing the risk of injury and ensuring proper cycle completion. The assembly includes a latch switch that det...Read moreects lid position and communicates with the washer’s control system, helping to resolve issues such as failure to start, agitation problems, or difficulty opening or closing the lid. Compatible with a wide range of models, this component is engineered for reliable performance and long-term durability. Installation may require basic tools and should be performed with the appliance unplugged.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged, the washer lid may not open or close properly. The lid hinge is screwed into the washer lid. You will need a Phillips-head screwdriver to d...Read moreetach it. There will be a lid hinge on either side of the lid, so be sure to determine if you need to replace both hinges, or only one.
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessive...Read morely during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John - For model number WTW8240YW0
January 12, 2020
Spin cycle stops short or not at all of complete cycle shows ol on display pamel
Hello John and thank you for writing.
It certainly sounds like it could be faulty basket hubs PS11723155, you should check for signs of damage, and replace if necessary.
OL stands for “Overload”, so in other words, the washer thinks the tub is too hard to move because it's overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. Defective basket hubs can cause this error code.
We hope this helps. Please contact us anytime if you require further assistance.
Washer leaks whenever we attempt to use the 'clean washer with a fresh' cycle. It does not leak otherwise. Is there a reason this would be the case? Tia
Hello and thank you for writing.
The clean washer cycle uses a higher water level which would explain why this only happens in this cycle. This could also possibly indicate a malfunctioning rotary sensor PS11749664, you should check for signs of damage, and replace the parts as necessary. We hope this helps. Please contact us anytime if you require further assistance.
The washing machine will wash clothes, drain water, but not spin on any cycle. What part is causing this issue?
Thanking you in advance,
Sharon
Hi Sharon, Thank you for reaching out. This could be caused by a faulty Lid Lock Assembly. The Lid Lock prevents the drum from spinning for safety reasons when the Lid is open. If the Lock is faulty it can not tell the controls it is safe to spin. We hope this solves your problem!
My fabric softener depended seems to be stop up, how do I clean it out
Hi Robert. Rinse the dispenser under hot water, working some of the fabric softener free with your fingers. Set the dispenser in a bucket add water and and laundry soap, allow the dispenser to soak for 10 mins. Rinse the dispenser under warm water, wiping gently with a soft cloth. Wipe it gently with a soft cloth if the softener does not rinse away on its own. Dry the dispenser with a fresh cloth, then put it back into position in the washing machine. Thank you for your question and good luck with your repair.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Julie - For model number WTW8240YW0
February 22, 2020
Does this model washer have a removable filter you can clean out? I am getting a residue left on my clothes.
Hello Julie,
Thank you for your question. We have done and investigation into your model WTW8240YW0. The removable filter for this model would be listed under part number PS349000. It has currently been discontinued by the manufacturer. The filter is located in the side of the washer tub, you will need a screwdriver to remove it. We hope this helps you.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Violent shacking in spin mode.
189 of 229 peoplefound this instruction helpful.
Terry from Homosassa, FL
Really Easy
30 - 60 mins
Pliers, Screw drivers, Wrench (Adjustable)
Watched a video on the internet.
Was this helpful?
Thank you for voting!
The washer was making a horrible noise during the spin cycle
54 of 68 peoplefound this instruction helpful.
Kevin from CLARK, MO
Really Easy
30 - 60 mins
Pliers, Screw drivers, Socket set
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitratin
... Read moreg oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
Read less
Was this helpful?
Thank you for voting!
Over shaking and knocking on the side
25 of 28 peoplefound this instruction helpful.
Alain.m from HARLINGEN, TX
A Bit Difficult
30 - 60 mins
Screw drivers, Socket set
Went on u tube saw different video to How disassemble the top to have access to the rod. Changing one by one those rod I was in need of my wife to hold the cover while I was changing the rod.... order for suspension rod kit. Reassemble the top by sliding the cover and to snap. Screw back the panel. And it solve the problem. My wife was r
... Read moreeally happy so me. It can be done by anybody but first go on the internet to get a idea.
My Orders
