This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your wa...
$4.39
In Stock
Order within the next 9 hrs and your part ships today!
This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appliance, uncontrollabl...
$11.09
In Stock
Order within the next 9 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.33
In Stock
Order within the next 9 hrs and your part ships today!
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
$70.49
In Stock
Order within the next 9 hrs and your part ships today!
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your wa...
$101.06
In Stock
Order within the next 9 hrs and your part ships today!
Sits in between the agitator base and upper agitator.
$11.09
In Stock
Order within the next 9 hrs and your part ships today!
Questions And Answers for WTW4816FW2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
61 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vicki
August 18, 2021
The tub knocks bad when in spin cycle. I arrange the clothes over and it doesn't stop. It does it most when slowing down and it does it every wash liad.
For model number WTW4816FW2
Hi Vicki,
Thank you for your question. If your washer is shaking and moving during the spin cycle, there are some parts that you will need to check to see which one is causing the issue. You will need to check the suspension rods, the tub ring and the tub wear pads . We hope this helps! Good luck with the repair!
My washer is 2 years old and has auto fill. It stopped filling with enough water to wash the load but continues to wash cycle. What does it need?
For model number WTW4816FW2
Hi Mary,
Thank you for your question. If the washer is not filling with water, you will need to check the hoses and screens, the water inlet valve, the lid lock/switch, the selector switch and water temperature switch, the water level pressure switch and the electronic control board. For more information on how to test these parts, click on the Appliance Repair link on our website and on the next page that comes up click on the washer icon. When the next page comes up, you will be provided with a symptoms list. Choose the "Will not fill with water" symptom and the information will come up for you. We hope this helps. Thank you and have a great day.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jesse
February 12, 2020
When i close my washer lid the washer wont work it is in the magntic part where the lid locks
For model number WTW4816FW2
Hi Jesse,
Thank you for your question. You will need to replace the door lock assembly. The part number listed for the assembly is PS12704713. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Carlos
June 7, 2023
Whenever I close the lid, the machine only makes a clicking noise. Sounds like if the machine is turning on and off. No indicator lights turn on and will not go into service diagnostic mode
For model number WTW4816FW2
Hi Carlos, thank you for reaching out. If the washer starts having the mentioned issues after closing the lid, the most probable cause is a faulty door lock assembly, part number PS12704713, which may need to be replaced. We hope this solves your problem!
My washer keeps loosing will not go in to rinse just wash and drain but will not go into rinse
For model number WTW4816FW2
Hello Victor, thank you for the question. Based on our research, you may need to check the electronic control board, part number PS12348139, to fix the issue. The control manages the cycles of the washer. If the control board is faulty, it will miss the rinse cycle and start drain cycle. We hope this helps!
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs. Slip the new cogs into the underside of the cup, and slide the cup back down in the a
... Read moregitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out). Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of o
... Read moreld cogs remove and replace with new, reassemble
Pulled off the dispenser. Used socket set to remove bolt. Removed entire agitator out of washer. Placed both feet on bottom of agitator and then pulled up on the upper agitator. It took some muscle due to the years of washer use. I used a flat-head screwdriver to weaken the plastic clips holding down the old bearing-driven cam. Once
... Read more I got the upper agitator off, the guts were easy to pull out. Then I just re-assembled with the 3 new parts (the Cam Driven, the Dog Ears, and the Bearing-Driven Cam).
