This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This genuine OEM drive belt is designed to transfer power from the motor to the drum in select Whirlpool, Maytag, Kenmore, and other compatible washing machines. Operating at 115 volts and 60 Hz, the belt enables the drum to spin and agitate during wash and spin cycles, ensuring effective cleaning and rinsing. Manufactured to Whirlpool’s ...Read morespecifications, this replacement part offers reliable performance and a precise fit. Common symptoms of a worn or broken belt include the drum not spinning, unusual noises, or a burning smell during operation. Replacing the belt can restore proper function and prevent further mechanical issues. Always verify compatibility with your specific model before ordering.
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your washing machine is experiencing issues starting or if the lid is not securing, this lid lock assembly likely needs to be replaced. This lid lo...Read moreck attaches underneath the top portion of your washer and its wire harness connects to the rear of the appliance. To replace this assembly, you will need a screwdriver, flathead screwdriver or putty knife, and wrench. This lid lock is an OEM part that is sold individually and does not come with any other parts or accessories.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
This suspension rod kit includes four rods designed to stabilize the wash tub in compatible top-load washing machines. By minimizing vibrations and excessive movement during wash and spin cycles, these rods help maintain balance and improve overall performance—especially when handling off-balance loads. Replacing worn or damaged suspensio...Read moren rods can resolve issues such as shaking, banging, or the washer shifting during operation. Installation requires unplugging the appliance and consulting the user manual for model-specific guidance. This kit is compatible with a range of washing machine models and is sold as a complete set.
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. Signs of a fau...Read morelty shift actuator include the washer failing to agitate or spin, incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah - For model number WTW4815EW1
October 17, 2023
Can you tell me what year this is by the model number?
Hi Deborah, thank you for your question! Your model was approximately manufactured in 2014. To provide you with the exact age, we will require the serial number of your model. We hope this is helpful!
5 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Pat - For model number WTW4815EW1
February 27, 2020
Washer will not advance to the last spin cycle, how to repair?
Hello Pat, thank you for your question. We would recommend testing the lid switch first, and then the actuator. If the unit is not latching the unit will not go into the final spin. Also, the actuator switches the unit from agitation to spin and may not be working properly. If those parts are ok, the issue would be with the timer which is the electronic timing board that processes the unit through the cycles. Please see the parts linked below. I hope this helps.
Ser: C61621345 when i run a load of laundry water is leaking on to the floor. I'm not sure where to look. Is this an easy fix?
Hello Greg, Thank you for contacting us. It is possible that your tub seal may be worn and causing the leak. You would need to inspect the seal for damage to be sure. I hope this helps.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
CASSIE - For model number WTW4815EW1
November 17, 2023
I did the method to get errors on this machine the senor light and the wash light come on together and flash then the done light flashes. By youtube that is suppose to be the error . It starts filling up then starts draining. If you recalibrate it by the you tube method sometimes you can trick it in to washing clothes but not often. I can not find a book online to show me those error codes. My receipt says 2016 so it may not be worth fixing. serial number c54721032 or either the 5 is a s
Hello Cassie, thank you for writing in. We have a page on our site that has some codes. This is the link for you to look at. https://www.partselect.com/JustForFun/Fault-Codes.htm. We recommend for your to check your drain hose is not kinked or clogged as well as Water-Level Pressure Switch PartSelect Number PS11741206. We hope this helps.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Gay - For model number WTW4815EW1
November 27, 2023
Starts to fill for a minute or two and quits
Hi Gay, thank you for the question. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve, part number PS12349267. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise on bottom of Washer louder as time went on. 1 1/2 years
95 of 129 peoplefound this instruction helpful.
Jerry from WALLA WALLA, WA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers, Socket set
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
My Orders
