Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WT4870CW

WT4870CW LG Washer - Overview

Parts and Repair Help for models starting with WT4870CW

If you know the washer repair part you need, you can browse the list of all parts for models starting with WT4870CW, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with WT4870CW

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$28.71

Sensor Assembly

$48.25

VALVE ASSEMBLY,INLET

This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.

$15.54

Cap,Pulsator

This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the ...

$102.43

PULSATOR ASSEMBLY

This genuine OEM wash plate, also known as a pulsator assembly, is a replacement part for your washing machine. Replacing this part can help solve issues with the agitator. To replace the wash plate, you will most likely need a 10 mm socket, and a screwdriver to pry off the wash plate cap. Use your socket to remove the mounting screw and lift off the wash plate. Insert the new wash plate onto the shaft. Tighten the mounting screw and snap the wash cap back into place.

$17.98

HOSE ASSEMBLY,DRAIN

$5.72

Screw,Customized

$4.35

Clamp

$11.85

Cap,Softener

$15.54

Cap,Cover

$4.35

Washer,Common

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

LE Error Message and won't spin drum properly

  • Customer: Mark from Harrisburg, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 193 of 256 people found this instruction helpful
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was t... read more

LE fail code

  • Customer: scott from GODDARD, KS
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 8 of 8 people found this instruction helpful
Removed back of washer with screw driver, Removed outer motor cover with a 17 mm socket (1 bolt), Removed motor stater using 10 mm socket (8 bolts). Left motor plugged in and and tipped to the side exposing the sensor. Unplug and snap off sensor. Reassembled in opposite order. Machine works great. Very easy fix, and perfect fit on part. read more

"Le" Fail Code on digital display ... Washer would not agitate and made an odd noise.

  • Customer: Ronny from GASTONIA, NC
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 2 of 2 people found this instruction helpful
I first thought there was a mechanical problem but after checking everything mechanical I discounted that idea ... I researched and found out from others with a similar problem that the Le code display was probably a sensor problem ... I ordered a replacement sensor ... With the new sensor available, I removed the access panel to the back of the machine (phi... read more