WSM27THCWWW General Electric Washer - Parts

The lower front felt seal with adhesive, also known as a drum felt seal, is used in dyers and allows the drum to easily glide on the front panel. For this repair project, you will need the following tools: #2 Phillips screw driver, #2 square head screw driver, putty knife, and wire bush. If your dryer will not tumble, or makes a squeaking...Read more noise when running, replacing this part could solve the problem. Remember to unplug your appliance from the power source for safety before you begin this installation project. Refer to the manual provided by the manufacturer for further installation instructions.

Used with washer/dryer combo machines. This knob takes a D-shaped shaft.

Sold individually. There are some dryers that require 2 per dryer. They attach to the outer-most sides of the bearing.

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

This screw is sold individually. Size 8 - 18 x 0.31

This part is found in the same location as the Terminal Block at the back of the Dryer. It acts as a safety device which prevents your appliance from overheating.