Models > WSM27THCWWW

WSM27THCWWW General Electric Washer - Overview

Sections of the WSM27THCWWW

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Timer Knob - Dryer – Part Number: WE01X10160
Timer Knob - Dryer
★★★★★
★★★★★
(7)
PartSelect #: PS755794
Manufacturer #: WE01X10160
Used with washer/dryer combo machines. This knob takes a D-shaped shaft.
$74.37
  In Stock
Order within the next 12 hrs and your part ships today!
Drum Glide – Part Number: WE03X10007
Drum Glide
PartSelect #: PS755802
Manufacturer #: WE03X10007
Sold individually. There are some dryers that require 2 per dryer. They attach to the outer-most sides of the bearing.
$71.22
  In Stock
Order within the next 12 hrs and your part ships today!
Drain Pump – Part Number: WH23X10016
Drain Pump
★★★★★
★★★★★
(1)
PartSelect #: PS271336
Manufacturer #: WH23X10016
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
  No Longer Available
Upper Felt Seal with Adhesive – Part Number: WE09X10013
Upper Felt Seal with Adhesive
★★★★★
★★★★★
(1)
PartSelect #: PS652857
Manufacturer #: WE09X10013
$106.48
  On Order
Washer Package of 12 – Part Number: WH2X42D
Washer Package of 12
PartSelect #: PS271567
Manufacturer #: WH2X42D
$8.06
  Special Order
Lower Felt Seal with Adhesive – Part Number: WE09X10014
Lower Felt Seal with Adhesive
PartSelect #: PS755828
Manufacturer #: WE09X10014
  No Longer Available
SCREW 8-18 X .31 – Part Number: WR2X9494
SCREW 8-18 X .31
★★★★★
★★★★★
(1)
PartSelect #: PS299875
Manufacturer #: WR2X9494
This screw is sold individually. Size 8 - 18 x 0.31
$35.38
  Special Order
Thermal Limiter – Part Number: WE04X10094
Thermal Limiter
PartSelect #: PS755806
Manufacturer #: WE04X10094
This part is found in the same location as the Terminal Block at the back of the Dryer. It acts as a safety device which prevents your appliance from overheating.
$79.75
  In Stock
Order within the next 12 hrs and your part ships today!
Drain Hose – Part Number: WH01X10189
Drain Hose
PartSelect #: PS756357
Manufacturer #: WH01X10189
  No Longer Available
DOOR CATCH – Part Number: WE01X10023
DOOR CATCH
PartSelect #: PS264343
Manufacturer #: WE01X10023
  No Longer Available
THRUST WASHR – Part Number: WH2X1009
THRUST WASHR
PartSelect #: PS271401
Manufacturer #: WH2X1009
$20.67
  Special Order
POWER CORD (120V GAS) – Part Number: WE26M345
POWER CORD (120V GAS)
PartSelect #: PS2374304
Manufacturer #: WE26M345
$44.26
  In Stock
Order within the next 12 hrs and your part ships today!

Questions And Answers for WSM27THCWWW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the WSM27THCWWW

[Viewing 3 of 3]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The water pump becomes very noisy
This is the second time in the same 7 year old appliance. Remove the front bottom cover by removing 2 screws. Then remove the 2 screws holding the pump down. Then unclip the electrical wire from the pump and remove both hoses from the pump by squeezing the spring clamps with a pliers. Have a pan to collect the water that will drain from the lines. Take the new pump and install it in reverse order from above.
Parts Used:
Drain Pump
  • Roger from Hudson, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control knob had broken and we were unable to set the dryer
I first ordered the replacement knob. It had broken before and I had repaired using a steel washer and epoxy to support the cracked plastic. When the support system I installed broke, I suspected a deeper problem; increased resistance to knob rotation in the control system. I removed the front panel to get back at the switch area. I wanted to lubricate the whole control, but UT seemed to be well sealed. Finding a couple areas where the plastic came together, held by a permanent metal mount, I used a pressurized silicone lubricant and sprayed into the small spaces. That allowed for easier rotation of the control, hopefully giving a longer lifespan to the new knob. DO
Parts Used:
Timer Knob - Dryer
  • Dave from Salt Lake City, UT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob broke on my dryer
I just put the new knob on! It was simple! Took less than a minute.
Parts Used:
Timer Knob - Dryer
  • Elizabeth from Northville, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!