- Home
- WRT15CSHW2
- Instructions
WRT15CSHW2 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Retaining bar for bottle shelf in door missing
2 of 3 people
found this instruction helpful.
-
Oliver from Garden Grove, CA
- Really Easy
- Less than 15 mins
Placed end cap on one end of rack and attached to one side of the door by applying hand pressure.
Inserted the other end of the rack into the end cap'
and again applied hand pressure to insert into slot, Repairs completed.
Inserted the other end of the rack into the end cap'
and again applied hand pressure to insert into slot, Repairs completed.
Other Parts Used:
Was this helpful?
Thank you for voting!
The freezer was too warm. The fan was running: the diagnosis tool did not work!
2 of 3 people
found this instruction helpful.
-
Xavier from Philadelphia, PA
- Easy
- Less than 15 mins
-
Screw drivers
I used the tool at Partselect that in theory allows diagnostic of the problem to be repaired. The result was that more tan 90% of the time with the introduced symptoms it had to be the thermostat. I order the part, got it quickly and installed. It did not fix the problem. So, be careful with the diagnostic tool, because it is just bas
... Read more
ed on what most people buy when they have a particular problem. Videos for installation are great. If diagnosis was better, this would be fantastic. In my case there might be a different problem.
Read less
Was this helpful?
Thank you for voting!
first fresh food too hot, then freezer too hot
2 of 3 people
found this instruction helpful.
-
Rita from Lake Luzerne, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
Based on the website I decided it was most probably the defrost timer, and that was correct. I ordered it, watched the video, and two days later the part was at my door. Took the nut driver, removed 4 screws, then removed the old defrost timer, installed the new one, re-installed the whole plastic assembly with the four screws, and done
... Read more
!!! Couldn't have been easier.
Read less
Was this helpful?
Thank you for voting!
Broken door handle
2 of 4 people
found this instruction helpful.
-
Mark from Apollo Beach, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was relatively easy. What was surprising was the delivery of the part…ordered on Sunday and it was delivered by Tuesday morning. Wow, I was impressed!!!
Was this helpful?
Thank you for voting!
Missing refrigerator shelf rack from rental property refrigerator
1 person
found this instruction helpful.
-
Janet from Livermore, CA
- Really Easy
- Less than 15 mins
I want to start by saying that I am female and want to let all females know that we can do home repairs! My story is not just about the repair but the wonderful customer service at PartsSelect.com. I have used them MANY times to order missing parts for appliances (I own rental property and tenants are always "losing" or breaking appliance
... Read more
parts). This particular time was the first time I received an incorrect part...not sure if it was my ordering or the wrong part was shipped. I contacted PartsSelect.com by email and got a REAL response within 24 hours. The customer service person who responded, immediately credited my account and "found" the correct part to order and less than 48 hours after my first email to them, my new part is already on it's way! I know it will only take minutes to finish my repair and am really impressed with their response time and professionalism when there is a problem. As a rental property owner, I will continue to use and recommend PartSelect.com.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer door rack was missing.
2 of 4 people
found this instruction helpful.
-
Franklin from White Lake, MI
- Really Easy
- Less than 15 mins
I snapped one of the end caps in, put the rack rail into the cap, placed the other cap on the other end, and snapped that end in. Because I received the exact parts needed, the entire repair took about one minute.
Other Parts Used:
Was this helpful?
Thank you for voting!
door brackets were broke off refridgerator
1 person
found this instruction helpful.
-
Tonda from Holland, OH
- Really Easy
- Less than 15 mins
Put the end caps on the metal bar and put it on the freezer door and it snapped right in.
Very easy to do in less then 4 minutes to do both shelves.
Thank you very much.
Very easy to do in less then 4 minutes to do both shelves.
Thank you very much.
Was this helpful?
Thank you for voting!
The supports for the crisper cover had broken and the draws would not open correctly
2 of 4 people
found this instruction helpful.
-
WAYNE from NOVATO, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I watch the how to repair video on line and the repair went very quick and easy.It was just like the video,no hidden suprises.
Was this helpful?
Thank you for voting!
Handle broke at screw hold down area
1 person
found this instruction helpful.
-
anthony from BRADENTON, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove the screws and pivot handle. Push handle downward and it slides off the screw head sticking out of door. To replace handle, just work in reverse. It
Didn’t take more than 3-4 minutes to do the whole job.
Didn’t take more than 3-4 minutes to do the whole job.
Was this helpful?
Thank you for voting!
broken handle
1 person
found this instruction helpful.
-
Kathy from Freeport, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply removed the old screws and slipped handle off of main screw on face of refrigerator door. Removed broken plastic of handle then slid new handle over screw on face of door, rotated handle till it aligned with screw holes on top of door and put screws back in previous holes for the screws. It was a done deal.
Was this helpful?
Thank you for voting!
broken door handle (bottom)
1 person
found this instruction helpful.
-
ANITA from SAINT LOUIS, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
assist with grandson. So easy to-do will order top door handle .
Was this helpful?
Thank you for voting!
None
1 person
found this instruction helpful.
-
Betty from BERKELEY, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Follow the instructions of the tape and put it together.
Was this helpful?
Thank you for voting!
Door handle had too much space between the door and handles.
1 person
found this instruction helpful.
-
Michael from MEMPHIS, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Use the rubber brushing to fill the gap.
Other Parts Used:
Was this helpful?
Thank you for voting!
needed new refrigerator door handle
1 person
found this instruction helpful.
-
Liz from Spring Valley, CA
- Very Easy
- Less than 15 mins
-
Screw drivers
took less than 5 minutes had to undo two screws and take out old broken off part and put new handle on and put screws in
Was this helpful?
Thank you for voting!
The refrigerator light would not work ...even after replacing the bulb.
2 of 4 people
found this instruction helpful.
-
TIM from WOODBURY, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.
Was this helpful?
Thank you for voting!