EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WRS20PRCD1 Frigidaire Refrigerator - Instructions

All Instructions for the WRS20PRCD1
106 - 120 of 224

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
clips on both end caps we broken and the crossbar kept falling off.
0 of 1 people found this instruction helpful.
  • Frank from Orange Park, FL
  • Really Easy
  • Less than 15 mins
First i pulled the crossbar off the door, then I pulled both end caps off the crossbar and then I
put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
Was this helpful?
Thank you for voting!
frezzer iceing over and not cooling the refrigerator
1 of 4 people found this instruction helpful.
  • Marcus from Pine Hill, AL
  • Really Easy
  • Less than 15 mins
Just removed the two screws and unpluged it.
Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator.
Thanks for the fast delevery. Will do busness with you in the future.
Was this helpful?
Thank you for voting!
door end cap broken,
0 of 1 people found this instruction helpful.
  • Edward from Piscataway, NJ
  • Really Easy
  • Less than 15 mins
Put the new ordered door end caps in place, everything worked fine.
Was this helpful?
Thank you for voting!
Wrong size listed on website.
0 of 1 people found this instruction helpful.
  • Elizabeth from Weems, VA
  • Really Easy
  • Less than 15 mins
The end cap is easy to remove and replace. The personnel at PartSelect was extremely helpful in re-ordering the correct part.
Was this helpful?
Thank you for voting!
Freezer door shelf end cap broke
0 of 1 people found this instruction helpful.
  • Melanie from Green Bay, WY
  • Really Easy
  • Less than 15 mins
The only problem I had was that the end cap was sent before the rack. This refrigerator is in our cottage and I brought up the end cap while waiting to receive the rack. I couldn't remember where I put the end cap, so when the rack came it took me a few weekends to find the end cap. Once I did, it took me less than 1 minute to repair. I put the rack on the end caps & pushed the end cap in place. DONE!
Was this helpful?
Thank you for voting!
End caps broken
0 of 1 people found this instruction helpful.
  • Russell from Clevelamd, TN
  • Really Easy
  • Less than 15 mins
End caps snapped out of door,
Replaced with new caps
Was this helpful?
Thank you for voting!
Freezer okay, but fridge was warm
0 of 1 people found this instruction helpful.
  • brad from minneapolis, MN
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Website was great!

The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.

To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Was this helpful?
Thank you for voting!
We Are Moving Out Of Military Housing And We Had To Replace The Freezer Door Holder Before We Moved Or We Would Have Had To Pay For The Wholr Refrigerator
0 of 2 people found this instruction helpful.
  • Christopher from Fort Sill, OK
  • Really Easy
  • Less than 15 mins
We replace the end pieces to hook the holder back on the door.
Was this helpful?
Thank you for voting!
broken shelf bar with missing end brackets.
0 of 2 people found this instruction helpful.
  • Robert from Oconomowoc, WI
  • Really Easy
  • Less than 15 mins
Ordered the parts from the product discription (photo) as well as chart showing actual size. Got the parts( in two separate shipments) cut the bar to length and snapped them inot place. Bingo!
Was this helpful?
Thank you for voting!
coil Iceing up
0 of 2 people found this instruction helpful.
  • Thomas from Stuart, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check the heaters and drain .
Was this helpful?
Thank you for voting!
leaking water down into fridge
0 of 2 people found this instruction helpful.
  • Ronald from Defiance, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
just like the video showed...it was excellent!!!
Was this helpful?
Thank you for voting!
The defrost heater failed
  • Mark from Memphis, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
I ordered the part, easily installed a new one. Everything works greatnow.
Was this helpful?
Thank you for voting!
ice buil up on freezer,not defrosting
  • Ed from Glendale, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
first I replaced the timer control hoping thats the problem,unfortunately situation the same ice build up on the freezer.so I replaced the defrost thermostat.right now I'll still observing the condition if still the same.may be in couple days.so far its good.and to replace the parts is not difficult and easy.
Was this helpful?
Thank you for voting!
Coil, in freezer kept freezing up, refrigerator did not stay cold
  • Janet from East Wenatchee, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the timer, installed the new one. Great service from part select
Was this helpful?
Thank you for voting!
Freezer wouldn't go in to defrost cycle
  • John from Long Beach, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Socket set
After some troubleshooting to ensure the thermostat and heating element were working, determined that the defrost timer was the problem. With the defective part, I was able to manually advance the timer to activate the defrost cycle, but it wouldn't do so on its own. Unplugged the refrigerator from the wall. Timer is located in the refrig erator compartment at the very top. The compartment houses the cooling thermostat, the light bulb and the defrost timer. Using 1/4" nut driver, remove 4 screws holding compartment cover to top of fridge. Lower a bit to access electrical wiring. Wiring harness can be unplugged to work on the timer away from the fridge which makes it a bit easier. Timer is mounted with 2 phillips head screws. Remove screws and unplug timer from wiring. Install new timer, plug in wiring, secure with the phillips head screws and remount entire compartment.
Was this helpful?
Thank you for voting!
All Instructions for the WRS20PRCD1
106 - 120 of 224