Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No freezing or cold in either freezer or refridgerator - compressor did not run.
1 of 2 peoplefound this instruction helpful.
George from Sunnyvale, CA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.
Was this helpful?
Thank you for voting!
Defroster didn't work
1 of 2 peoplefound this instruction helpful.
George from Eatonville, WA
Really Easy
Less than 15 mins
Screw drivers
Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance. Cool. GWE
Was this helpful?
Thank you for voting!
door shelf end caps were broken
1 of 3 peoplefound this instruction helpful.
Lupe from Las Cruces, NM
Really Easy
Less than 15 mins
Screw drivers
removed broken end caps, took a small screwdriver and simply applied a little pressure to release them. Pushed new end caps into place (they just snap in). Presto done!!
door shelf ends broken off from constant pulling on door and slaming it with 2 gallons of milk in door.
1 of 3 peoplefound this instruction helpful.
Katherine from Lafayette, LA
Really Easy
Less than 15 mins
Inserted the caps into the bar and snapped in door. That's it. No tools needed! Hope it last another 20 years
Was this helpful?
Thank you for voting!
broken lips on the drawer
1 of 3 peoplefound this instruction helpful.
albert from nashwauk, MN
Really Easy
Less than 15 mins
removed drawer, removed front, slid in the front, put back in. done
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 peoplefound this instruction helpful.
Denise from Landover, MD
Really Easy
Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Broken Glide
0 of 1 peoplefound this instruction helpful.
James from Staten Island, NY
Really Easy
Less than 15 mins
Nutdriver
Used Old Screws And a nutdriver
Was this helpful?
Thank you for voting!
freezer worked frig was warm. Ice maker is still not working
0 of 1 peoplefound this instruction helpful.
steve from Kirkland, WA
Really Easy
15 - 30 mins
Screw drivers
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
Was this helpful?
Thank you for voting!
loud noise fan blade broke,off balance
0 of 1 peoplefound this instruction helpful.
EDWIN from ELWOOD, IN
Really Easy
15 - 30 mins
Nutdriver
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!
Left bottom part of door rusting out
0 of 1 peoplefound this instruction helpful.
William from Moulton, TX
Easy
15 - 30 mins
Pliers, Socket set
took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.
Bought a new drawer and just used the clear front from the broken drawer. Very easy to replace. Also fast delivery , thank you part select.
Was this helpful?
Thank you for voting!
sheft ends brolen
0 of 1 peoplefound this instruction helpful.
Helen from Gulf Breeze, FL
Really Easy
Less than 15 mins
Cleaned and removed old ends, applied new ends and installed. Ends fit to order, shipping quick and parts affordable. Thank you
Was this helpful?
Thank you for voting!
Broken shelf
0 of 1 peoplefound this instruction helpful.
Rafael from Puerto Rico, AL
Really Easy
Less than 15 mins
Mount and dismount the part.
Was this helpful?
Thank you for voting!
The door end caps were broken and not fixable
0 of 1 peoplefound this instruction helpful.
Ryan from Coralville, IA
Really Easy
Less than 15 mins
I simply placed the retention bar between the new end caps and popped it into place. Took about 10 seconds to complete.
Was this helpful?
Thank you for voting!
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 peoplefound this instruction helpful.
LUIS from CENTENNIAL, CO
Really Easy
Less than 15 mins
Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
My Orders
