This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Order within the next 6 hrs and your part ships today!
This drain pump for your washer is designed to remove the dirty water during and after the washing cycle. If your washer has water left in it after its washing cycle is over, or if your washer is expe...
$51.19
In Stock
Order within the next 6 hrs and your part ships today!
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is imp...
$7.45
In Stock
Order within the next 6 hrs and your part ships today!
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut...
$92.75
In Stock
Order within the next 6 hrs and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 6 hrs and your part ships today!
This is a door bellow, also known as a door seal gasket, made for various models of washing machine. This bellow is designed to seal the inner drum of the washer from the outside of the washing machin...
$212.72
In Stock
Order within the next 6 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Order within the next 6 hrs and your part ships today!
This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and cl...
$22.58
In Stock
Order within the next 6 hrs and your part ships today!
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling ...
$7.76
In Stock
Order within the next 6 hrs and your part ships today!
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
$55.53
In Stock
Order within the next 6 hrs and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for WFW87HEDW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
December 28, 2019
Why is my washer not squeezing out all the water like it usually does?
For model number WFW87HEDW0
Hello Jose,
Thank you for your question. Our sources say its likely a defective drain pump that is not draining all the water correctly for each load. You would need to replace the drain pump for your model under part PS11756700 to fix the draining issues. We hope this helps!
Whirlpool duet washing machine Normal light flashes and beeps at times
For model number WFW87HEDW0
Hello Randy, thank you for contacting us. Sometimes the washer flashes lights due to a loose door strike, part number PS11755543, and a faulty door lock, part number PS11754810. If this does not help, we would recommend checking the control board, part number PS11770315. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Is the washer bellow on the inside of the washer ( not around the door) I cannot get rid of the odor and mildew on the rubber part of the washer ( the bellow?) is it also possible that mildew can be on the inside of the washer? Not reachable without taking it apart?
For model number WFW87HEDW0
Hello Michelle, thank you for writing. Washer Maintenance should be performed once per month. The Clean Washer cycle uses higher water volumes in combination with Affresh PS1960673 washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. We found a video for you on how to clean the bellow. https://capitalappliancerepair.ca/mold-on-washer-gasket/. We hope this helps.
Hi Pat, thank you for writing in. Our research has found that part number PS11770315 is what you need. Our prices are available on our website and are subject to change. We hope this information is of use.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a
... Read more year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.