Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robyn S - May 22, 2018
Verified Purchase
Shipping
The part was correct but unfortunately after waiting for 10 days (standard shipping)and still no part I had to order another with overnight shipping. I did eventually get the original part after I paid a lot extra.
★★★★★
★★★★★
Carol C - May 22, 2018
Verified Purchase
Excellent
I sent a picture to the chat persons email. He found the exact part in seconds. Easy installation!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Strike on Washer Door - prevented door from latching, and washer would not start
The end of the strike had broken off, and the pictures did not clearly show there was a cross-member at the end of the strike. That crossmember is what broke on the old strike. The strike has only two screws, both requiring a Torx bit (#20, I believe). Unscrew both screws to remove the strike plate. It was a little difficult to get out -
... Read moreit has a curved top to lock into the top slot, but the bottom slides slightly down into another slot. There isn't a lot of room in the opening to slide the strike up and down and get it out. Putting the new strike on is easier - ensure the curved end fits into the slot at the top and slide it up just a bit, push the bottom of the strike plate in, then let it drop right into place, and reinsert the screws. The only problem I had was the strike's holes for the screws are slotted horizontally, so the strike can be positioned across almost 3/8". The latch would not engage the strike the first time, so I had to loosen the screws and reposition the strike a bit. This time it latched, but the fit wasn't quite right, so I adjusted it again to get it where I needed it.
Read less
David D from Severn, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hope
December 3, 2018
I need the strike part for the door. I don't know if i have the right part here. Its for a duet stackable washer
For model number WFW72HEDW0
Hi Hope, thank you for your question. Yes, this would be the correct strike for your appliance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Harley
November 4, 2021
My door locking mechanism or plastic latch has broke on the female part on the washer not on the door.
Not allowing me to latch and close the front door
For model number Mhw3505fw1
Hello Harley, thank you for your question. We have researched the model you have provided, and we would suggest the Lock door, part number PS11754810. We hope this helps!
I’m looking for a Amana front loader Stricker piece goes into door lock. Please let me know catalog number
For model number NFW7200TW
Hello Bridgid, thank you for your question. We have researched the model you have provided, and part number PS11741552 is the correct part for your unit. We hope this helps!
