Models
>
WF448AAP
WF448AAP Samsung Washer - Overview
Models starting with WF448AAP
Click on the best match to narrow your results.
- WF448AAP ( XAA-00 ) Samsung Washer (Samsung Wf448aap/Xaa-00 Washer)
- WF448AAP ( XAA-05 ) Samsung Washer (Samsung Wf448aap/Xaa-05 Washer)
- WF448AAP ( XAA-06 ) Samsung Washer (Samsung Wf448aap/Xaa-06 Washer)
- WF448AAP ( XAA-07 ) Samsung Washer (Samsung Wf448aap/Xaa-07 Washer)
- WF448AAP ( XAA-08 ) Samsung Washer (Samsung Wf448aap/Xaa-08 Washer)
- WF448AAP ( XAC 0005 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAC 0008 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAA 0002 ) Samsung Washer (4.5-Cu. Ft. Front-Load Washer With Vrt Plus - Onyx)
- WF448AAP ( XAC 0001 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAA 0003 ) Samsung Washer (4.5-Cu. Ft. Front-Load Washer With Vrt Plus - Onyx)
- WF448AAP ( XAC 0002 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAC 0006 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAC 0004 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAC 0007 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( YE 0001 ) Samsung Washer (27" Front-Load Steam Washer 3.9 Cu. Ft. Capicity)
- WF448AAP ( XAA 0001 ) Samsung Washer (4.5-Cu. Ft. Front-Load Washer With Vrt Plus - Onyx)
- WF448AAP ( XAA 0004 ) Samsung Washer (4.5-Cu. Ft. Front-Load Washer With Vrt Plus - Onyx)
- WF448AAP (XAA-0008) Samsung Washer (WASHER)
- WF448AAP (XAA-0005) Samsung Washer (WASHER)
- WF448AAP (XAA-0006) Samsung Washer (WASHER)
- WF448AAP (XAA-0007) Samsung Washer (WASHER)
- WF448AAP (XAA-0000) Samsung Washer (WASHER)
- WF448AAP (XAC) Samsung Washer (WASHER)
- WF448AAP/XAA-0000 Samsung Washer
- WF448AAP/XAC Samsung Washer
- WF448AAPXAA Samsung Washer (Samsung Washing Machine Model WF448AAPXAA Parts)
- WF448AAPXAP Samsung Washer (Samsung Washing Machine Model WF448AAPXAP Parts)
- WF448AAPYE Samsung Washer (Samsung Washing Machine Model WF448AAPYE Parts)
Keep searches simple, eg. "belt" or "pump".
Door Lock Latch
PartSelect #: PS11745016
Manufacturer #: WP8182634
This part is used on front load washers and includes the interlock switch assembly.
$123.10
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Drain Pump Assembly - 120V 60Hz
PartSelect #: PS4204638
Manufacturer #: DC31-00054A
This is a 120 volt, 60 hertz drain pump assembly for a washing machine. It is a genuine OEM part. This pump helps expel water from the washing machine, and is activated after the spin speed is maintai...
$181.80
In Stock
Inlet Hose - 5 FT
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$21.53
In Stock
Hex Head Bolt
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing...
$11.94
In Stock
Shock Damper Front
PartSelect #: PS4212219
Manufacturer #: DC66-00470A
This is an individually sold front shock absorber designed for use with Samsung dryers. Shock absorbers are used to distribute the weight of the dryer drum evenly and ensure that the different bumps a...
$73.05
In Stock
Affresh Washing Machine Cleaner - 3 pack
PartSelect #: PS1960673
Manufacturer #: W10135699
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$12.60
In Stock
Door Switch Assembly
PartSelect #: PS4210737
Manufacturer #: DC64-00519B
This is a door switch assembly designed for Samsung washing machines. This door switch assembly is used to latch and lock the door shut before the washing cycle commences and communicates with the con...
$34.13
In Stock
Outer Seal Clamp
PartSelect #: PS4218211
Manufacturer #: DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made o...
$17.35
In Stock
VALVE-WATER;V-0117,NYLON
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$89.85
In Stock
Common Symptoms of models starting with WF448AAP
[Viewing 6 of 6]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
front load washer latch replacement
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using to ... Read more p opening.
7. reverse order to finish.
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using to ... Read more p opening.
7. reverse order to finish.
Read less
Parts Used:
-
James from Vilonia, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
192 of 231 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock was in the locked position and door could not close
I bought a new door lock for 132 dollars (item number PS2037196).
Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.
DISCONNECT POWER FROM MACHINE.
First take off the top by taking off the 2 screws on the bac ... Read more k of the machine.
Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).
Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.
Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.
Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).
Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)
If you have the new door lock continue here:
Take out all 3 cables on the old door lock by pressing on the corresponding clips.
Attach the new door lock with the correct cables. Assemble machine back together.
Thats it.
Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.
DISCONNECT POWER FROM MACHINE.
First take off the top by taking off the 2 screws on the bac ... Read more k of the machine.
Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).
Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.
Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.
Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).
Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)
If you have the new door lock continue here:
Take out all 3 cables on the old door lock by pressing on the corresponding clips.
Attach the new door lock with the correct cables. Assemble machine back together.
Thats it.
Read less
Parts Used:
-
Suryakant from Cortlandt Manor, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
65 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Washer became unbalanced and broke the latch on door
Had to take the entire front of the washer off to replace the door latch.
Parts Used:
-
Glenn from Las Vegaas, NM
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
30 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!