EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WED6400SW1 Whirlpool Dryer - Instructions

All Instructions for the WED6400SW1
121 - 135 of 323

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
clothes dryer got hot, but stopped spinning
2 of 6 people found this instruction helpful.
  • diane from Miami, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
got my daughter's boyfriend over.. he is like McEiver.. can fix anything with a bobbypin.... he told me what to order, you delivered it in 2 days.. and the dryer was fixed the next day. All it cost me was a roast beef dinner
Much better than that repairman who would have charged a minimum of $100 plus parts... at probably triple y our cost...
Was this helpful?
Thank you for voting!
Drum would not turn. Belt and pully were broke.
1 of 3 people found this instruction helpful.
  • Bradford from Marseilles, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I watched the video on the websit and it told me and showed me just what to do. Exccelent video, Ordered the repair kit, got it in two days. Job took me about 10 min.
Was this helpful?
Thank you for voting!
broken belt and idler pully
1 of 3 people found this instruction helpful.
  • vincent from staten island, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Thanks to the sep by step instructions I got from part select this repair was very simple. The disassembling was relatively easy, my new maintainance kit came the nest day, the machine was already apart and the parts went in without a hitch. THANKYOU
Was this helpful?
Thank you for voting!
dryer lens had melted
1 of 4 people found this instruction helpful.
  • DAVID from HOUSTON, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
i removed the old lens,then removed the bulb,after ordering and receiving your replacement lense,it went back on just like the old one.the repair was very easy. thank you. D.S P.S1 IAM A REPIARMAN NOW!!! WITH YOUR VIRTUAL REPAIRMAN APP,VERY VERY SMART ILL SPREAD THE WORD.
Was this helpful?
Thank you for voting!
Broken clips
0 of 1 people found this instruction helpful.
  • Roger from Twinsburg, AL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Turned off power and pulled power plug from the wall. Removed the two screws at the lint screen. Raised the top to by depressing the top spring clips. Removed the two 5/16" screws from front top. Removed wiring clips from front panel. Set the front aside while I removed the two broken panel clips. Installed the two new panel clips. rei nstalled the front panel by placing the front panel above the sides. Opened the front panel door and supported the drum while allowing the front panel to slide down onto the new front panel clips. Reinstalled the wiring clip. reinstalled the two 5/16 screws. Turned the drum to ensure that the felt seals and drive belt weere installed properly. Lowered the top and reinstalled the two screws at lint screen. Reinstalled power plug and turned on power. No rattles or squeeks!!!
Was this helpful?
Thank you for voting!
Tumbler drive belt was slipping which made grey dust coat inside of dryer
0 of 2 people found this instruction helpful.
  • James from North Attleboro, MA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Installed new belt and cleaned dust and wiped out inside of drum with Fantastic and clean sponge.
Was this helpful?
Thank you for voting!
Gas dryer shut off mid cycle in timed cycle mode
3 of 11 people found this instruction helpful.
  • Brad from Wausau, WI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Removed the lower front cover of the dryer. Removed the lint filter and removed the cover from the air duct by removing two 1/4" bolts. Removed the two 1/4" bolts retaining the thermistor. Installed the new thermistor and covers.
Was this helpful?
Thank you for voting!
black scratchers from wheel chair
3 of 12 people found this instruction helpful.
  • Linda from GLEN CARBON, IL
  • Very Easy
  • 30 - 60 mins
shook bottle and painted waited a day and repeated
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
replaced the fan
34 of 282 people found this instruction helpful.
  • steven from idaho falls, ID
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Wrench (Adjustable)
I had to remove the back, top and the tumbler to get to the fan...there are instuctions near the motor that tell you how to remove the fan and in which direction to turn...really is easy, just keep track of how the tumbler belt is routed on the pulley of the motor before you take it off.
Was this helpful?
Thank you for voting!
Dryer Came On & Made Alot Of Noise
33 of 772 people found this instruction helpful.
  • wendy from bush, LA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Took off the front of & lifted the top up. Pulled the drum out & replaced the two wheels that turn the drum, replaced the belt & replaced the pully wheel that turns the belt & dryer motor & put back together. The dryer now runs like a new one. Has no noise when running.
Was this helpful?
Thank you for voting!
Drum not rotating
  • Chris from Sayrevlle, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Broken belt, but went with the mainentance kit since it was going to be all apart anyway. Found the job easy to do and the new belt idler was a big improvement over the old style. /also came with instructions. Good for another 5-10 years.
Was this helpful?
Thank you for voting!
Drum stopped turning
  • David from Jamestown, RI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Using a stiff putty knife I depressed the clips that hold the top down. I loosened the screws at the lower edge of the front panel and removed the two 5/16 head screws that hold the front on. I unplugged the door switch and lifted the front off the lower screws. I removed the drum and the broken belt. I replaced the rear rollers after app lying some dry lube to the shafts and replaced the tension spring and rolled. I replaced the drum and belt and attached the belt to the small pulley on the motor. Then checked the rear gasket felt and reinstalled the front cover and the top.
Was this helpful?
Thank you for voting!
Door latch had failed; door would not close.
  • George from Oak Ridge, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
The door catch assembly is designed to slide into a hole stamped in the sheet metal. Normally, the repair only requires the use of pliers to grasp the top and bottom of the catch, compressing them enough to slide the catch out of the door. The new catch can be inserted through the hole and snapped into place the same way. In my case, t he catch was a very tight fit, so I had to remove the door from the dryer, remove the screws that hold the outside and inside door sections together, replace the damaged door catch, reassemble and re-mount the door. Having to do that increased the completion time for a simple repair that would normally take less than five minutes.
Was this helpful?
Thank you for voting!
Drum does not rotate
  • Richard from Westhope, ND
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Diagnose the problem. Is it the motor ? Is it the belt ? Order the correct repair kit, use name brand parts to ensure reliability. READ THE SUPPLIED DIRECTIONS. You can use a small wood shim or wedge at the top front corners to open the top . Use a 5/16" socket to remove the 2 screws at the top outside corners. Lift the front panel straight up, supporting the drum as you lift it off. Remove the drum, taking it straight out the front. Install the new drum rollers, install the idler, and then the belt around the drum. Install the drum on the rear rollers, make sure the seal is not folded under. Push the drum back against the seal flange, support the front of the drum with your right (or left ) hand, and sit the front panel on the lower pins, and gently push the front panel to the sidewalls. Feed the belt through the idler and around the motor pulley. This job is easily performed in about 20 minutes. Clean the interior while replacing the belt/idler and drum rollers. With the top lifted, after assembly, test run the dryer to make sure there are no "funny noises" after the repair. Watch especially for the white rub strips on the front edge of the drum. They tend to fold over when attaching the front panel. Job done !
Was this helpful?
Thank you for voting!
All Instructions for the WED6400SW1
121 - 135 of 323