My Orders
- Home
- WD-12416BD
- Instructions
WD-12416BD LG Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water was leaking out the bottom
-
Andrew from San Mateo, CA
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers
Followed the manufacturers instructions to disassemble the washer from the top. There was a video on youtube of a guy who was able to replace his bellows hose from the back, but maybe my arms weren't long enough, I couldn't reach all the way to the front. The washer was pretty easy to take apart, except for taking off the top, where there
... Read more
were 2 extra screws not mentioned in the instructions. Replacing the part was really easy. HERE'S THE MOST IMPORTANT PART: LG DOESN'T MENTION IT IS REALLY HARD TO GET THE CLAMP ASSEMBLY BACK ON THE GASKET WITHOUT A SPECIAL TOOL. You can buy the special LG tool, or you can do what I did (and others on the internet) and buy an $8 "Brake spring spreader" tool at your local auto parts store. Repair was a success. No more water leaking!
Read less
Was this helpful?
Thank you for voting!
Bearings were shot
-
Jean from Tolland, CT
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Took apart the washer and removed bearings and shaft on spider. My advice would be to order the spider and shaft (one piece) hen ordering the bearings, seal, and tub gasket. If the bearings are gone, it is likely the shaft is gone too as mine was.
Was this helpful?
Thank you for voting!