My Orders
- Home
- UQC061ALMK1
- Instructions
UQC061ALMK1 (AWYAUSL) LG Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad thermistor
1 person
found this instruction helpful.
-
Cindy from Baltimore, MD
- Really Easy
- 15 - 30 mins
-
Screw drivers
Took front cover off air conditioner and pulled it a little forward out of the outdoor housing. I then flipped the LED display section out to the left and exposed the patch panel. The next step was to remove the panel with a small screwdriver and disconnect the old thermistor plug. I then plugged in the new one, remove the old one from th
... Read more
e grid bracket and placed the new one in. I then replaced everything else in reverse order. I have two LG air conditioners and they both have the same connection setup.
Read less
Was this helpful?
Thank you for voting!
Bad thermister, unit would run constantly without cycling.
0 of 2 people
found this instruction helpful.
-
Gary from Aurora, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove the front cover. Slide the unit forward a few inches from the case. Remove 1 screw from the top on the control box. Unsnap the old thermister leads going into the circuit board. Snap in the new thermister and place the end in the plastic holder in front of the coils. Install front cover.
Was this helpful?
Thank you for voting!