TURBOROLL (0271823) Wagner Paint Sprayer - Parts

Tube, Fill, Suction-PM

Genuine Wagner replacement part, this item is sold individually. This part acts as a valve, allowing the paint in the Powered Paint Roller to only flow in one direction and not back up. This part does wear out, having on or two extra may be a good idea.

This authentic OEM component is specifically designed for use with Wagner powered paint rollers. It serves as a high-quality replacement for a missing or worn paint roller cover originally included with the unit. Made from a durable blend of 30% plastic and 70% polyester fiber, this roller cover ensures smooth and consistent paint applica...Read moretion. It is sold individually, and the roller core is available separately. For proper fit and usage, please refer to your model’s owner’s manual and diagrams.

This is a retaining disc for various powered paint rollers. This disc is a small, round piece of durable plastic that fits on near the end of the handle shaft to secure the duckbill valve and suction fill tube. This retainer disc is an individually sold OEM part, meaning it does not come with any other parts or hardware for your paint rol...Read moreler. This disc fits in between the duckbill valve and the locking cap and features a 1-inch diameter. If you notice the suction tube for your paint roller remains unseated within its respective port, or if the suction is poor, consider inspecting and replacing this disc. To replace this disc, ensure there is no paint within the handle of the paint roller, before unthreading the locking cap on the suction port. Once the locking cap is removed, disconnect and remove the retainer disc and replace it with the new disc.

This durable plastic lid is an authentic Wagner part. This item was designed for use with the powered paint rollers listed below and is a non-standard sized lid that does not fit all models, so please make sure to check the diagram for your model to verify that it is compatible. One lid is included per order.

This is an Authentic Manufacturer Sourced replacement part designed for Wagner Paint Rollers. These items provide an Air-Tight Seal for the Roller Arm Assembly. Over time O-Rings will shrink, become brittle and crack allowing for air leaks. At that time they should be replaced. These rings and a seal are made out of Rubber. Replacing this item you would need Pliers or a tool to remove the old O-Rings.

Genuine OEM replacement part designed for use with a variety of Wagner Spray Painters (PaintMate Plus, TurboRoll, Paint-N-Roll and Others). This Assembly consists of A Roller Core, Cover and a Cap, all parts are made out of Plastic.

This is a genuine manufacturer-sourced part which is made for Wagner powered paint rollers. It is an identical replacement for a missing or a damaged roller arm assembly that was included with a new unit. The part supports the roller allowing it to rotate with minimum friction. Refer to the owner's manual for your model to ensure the proper repair procedure. One durable roller arm assembly is included.

It is a genuine component that is supplied directly from the original equipment manufacturer for use with Wagner paint rollers. This replacement shield is secured over the roller to prevent the paint from splashing. Please note this durable plastic item is sold individually.