My Orders
TMH14XMD0 Estate Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hood light wont work
9 of 22 people
found this instruction helpful.
-
Brandon from Vancouver, WA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Turned power off. Removed all the screws from bottom removed socket and replaced
Was this helpful?
Thank you for voting!
Range light bulbs were burned out
3 of 4 people
found this instruction helpful.
-
Barbara from MERIDIAN, ID
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
We needed a phillips head screw driver to remove the single screw holding the light bulb cover in place.
Removing the old bulbs was a little work, because they had come loose from the sockets. We unplugged the microwave, so we could grip the sockets with a tool. I think my husband used a needle nose plier for this.
The new bul ... Read more bs screwed in easily, and then we refastened the light bulb cover with the phillips head screw driver.
Removing the old bulbs was a little work, because they had come loose from the sockets. We unplugged the microwave, so we could grip the sockets with a tool. I think my husband used a needle nose plier for this.
The new bul ... Read more bs screwed in easily, and then we refastened the light bulb cover with the phillips head screw driver.
Read less
Was this helpful?
Thank you for voting!
glass turn table cracked needed a new one
3 of 4 people
found this instruction helpful.
-
sharon from LAS VEGAS, NV
- Really Easy
- Less than 15 mins
easy to replace, just the same as cleaning the turntable and placing back in the micorwave;
Was this helpful?
Thank you for voting!
light bulb burnt out .
3 of 4 people
found this instruction helpful.
-
DAN from CARPENTERSVLE, IL
- Really Easy
- 30 - 60 mins
Turn off power supply at breaker . Replace old bulb with new bulb .
Was this helpful?
Thank you for voting!
bought microwave at Garage sale, but with no mount bracket
9 of 22 people
found this instruction helpful.
-
Jesus from Lincoln, NE
- Really Easy
- 30 - 60 mins
-
Screw drivers
I was able to buy the mounting bracket for a very cheap price and was able to instill it in my kitchen with ease.
Thank you
Thank you
Was this helpful?
Thank you for voting!
Exterior light bulb (PS2376034) broken off in socket. No access for pliers after glass cover removed.
3 of 4 people
found this instruction helpful.
-
Alvin from HILTON HEAD, SC
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Unplug appliance. Remove total of 7 phillips screws from sides and front of bottom panel . Panel front drops down, remove one socket screw and socket. Now have access for lineman' s pliers to unscrew bulb base. Reinstall socket, replace bulb and 7 panel screws. Restore power.
Was this helpful?
Thank you for voting!
light bulb burned-out
13 of 34 people
found this instruction helpful.
-
Pablo from Burlingame, CA
- Really Easy
- Less than 15 mins
screwed in new bulb
Was this helpful?
Thank you for voting!
glass turntable broke in half, ring turn needed replaced
3 of 4 people
found this instruction helpful.
-
Gail from Cincinnati, OH
- Really Easy
- Less than 15 mins
I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next
Service was fantastic, parts were ordered one day and received the next
Was this helpful?
Thank you for voting!
broken glass tray
3 of 4 people
found this instruction helpful.
-
Mary from Ocala, FL
- Really Easy
- Less than 15 mins
Washed the glass tray and put in the microwave oven. Easy..
Was this helpful?
Thank you for voting!
Broken vent Grille (plastic tabs snapped)
3 of 4 people
found this instruction helpful.
-
Aaron from Trumbull, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
All you have to do is unscrew the clamps, remove the broken plastic pieces of tabs, fit the new grille into the slots on the bottom and put the two screws through the clamps at the top.
Was this helpful?
Thank you for voting!
Turntable coupling
3 of 5 people
found this instruction helpful.
-
Laura from Port St Lucie, FL
- Really Easy
- Less than 15 mins
Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!
Was this helpful?
Thank you for voting!
Broken Grill
2 of 2 people
found this instruction helpful.
-
John from W. Dover, VT
- Really Easy
- Less than 15 mins
-
Screw drivers
Snapped and screwed new part in minutes
Was this helpful?
Thank you for voting!
the original part had fallen off and broke when it hit the floor.
2 of 2 people
found this instruction helpful.
-
John from Los Angeles, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed two screws to that held the old bracket. Installed new part and replaced the screws. Very simple. About 10 minutes. The part cost about $38.00. A repairman charged my neighbor 100 + dollars for the part and plus installation for the exact same thing. I highly recommend Partselect.
Was this helpful?
Thank you for voting!
Burned out bulb
2 of 2 people
found this instruction helpful.
-
Theresa from OVERLAND PARK, KS
- Very Easy
- Less than 15 mins
-
Screw drivers
Husband replaced the bulb
Was this helpful?
Thank you for voting!
Microwave didn't have support ring when house was purchased.
2 of 2 people
found this instruction helpful.
-
Leon C from MEDFORD, OR
- Very Easy
- Less than 15 mins
Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!
Place support ring in track
Place turntable on support ring.
Easy, peasy!
Was this helpful?
Thank you for voting!