EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

TES355VB0 Estate Range - Instructions

All Instructions for the TES355VB0
31 - 45 of 195

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken front glass on oven door
9 of 14 people found this instruction helpful.
  • Brent P from Pembroke Pines, FL
  • Easy
  • Less than 15 mins
  • Screw drivers
I removed the handle by unscrewing two philips screws located on the each side on the top inside of the door. I then placed the glass bottom end in first, lined it up on both ends, put the handle back in place and put the screws back.
Was this helpful?
Thank you for voting!
Oven wasn't preheating to temperature
8 of 11 people found this instruction helpful.
  • Margaret from WALDORF, MD
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Repair of oven sensor easy to install; however, product did not resolve the problem. Returned new sensor and awaiting refund (2 weeks passed so far).
Was this helpful?
Thank you for voting!
broken bottom drawer glide and missing rivet on drawer front panel
7 of 9 people found this instruction helpful.
  • David from Fairborn, OH
  • Easy
  • Less than 15 mins
  • Screw drivers
Removed the old, broken drawer glide by removing the Phillips head screw. Then placed the new glide into place and fastened with the existing screw.

The rivet on the top of the bottom drawer front was missing. I lined up the drawer front with the supporting bracket behind it and inserted the rivet. All you have to do is tap the top of the pin in the center of the rivet to lock it in place. No rivet tool is needed. That should be explained in the parts listing because I bought the rivet tool before I realized I didn't need it.
Was this helpful?
Thank you for voting!
broken handel and trim
8 of 12 people found this instruction helpful.
  • James C. from Middletown, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Un-screwed 4 screws. Got part numbers off of the pieces. Put numbers in blank on web site and ordered the pieces. Parts cam in 4 days later and installed the pieces with my trusty screwdriver.
Was this helpful?
Thank you for voting!
Both right and left side trims were broken.
6 of 6 people found this instruction helpful.
  • A D from HOUSTON, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Ordered both parts using the excellent breakdown illustrations of the door. Received the parts along with video instructions on how to repair.
Was this helpful?
Thank you for voting!
The 8-inch burner only heated on high regardless of the temperature setting dialed in.
6 of 7 people found this instruction helpful.
  • Reginald from PLAINFIELD, IN
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged stove from electrical outlet. Pulled temperature control dial off by hand. Remove screws to top back stove panel with Phillips screwdriver. Removed top stove back panel. Unscrewed broken infinity switch from stove. Unclipped wiring harness to broken switch by prying loose with flat head screw driver. Reclipped wiring harness to new switch. Screwed replacement switch back onto stove. Reattached back panel with screws.
Was this helpful?
Thank you for voting!
The burner would not shut off.
6 of 8 people found this instruction helpful.
  • Richard from CONCORD, NH
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Pulled the dial off, unscrew two screws. Pull the switch out from the back. Disconnect the wires from the old switch and connect to the new switch one by one. Set the new switch in place. Sctew the two screws in to hold the switch in place. Push on the dial.
Was this helpful?
Thank you for voting!
light bulb in water ice freezer door went bad
8 of 14 people found this instruction helpful.
  • Carl from RIVERSIDE, CA
  • Very Difficult
  • More than 2 hours
  • Screw drivers
I didn't. Don't know how to get to light bulb to change it for this specific model
Was this helpful?
Thank you for voting!
The heating coil was no longer working.
5 of 6 people found this instruction helpful.
  • Amanda from Midwest City, OK
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My husband pulled the oven out and unscrewed the screws(in the back) the heating element came right out. He did everything on his own. The only thing he needed a little help with was for me to keep the heating coil flush to the back wall of the oven, while he screwed the new one in. It was a very quick job. The longest part was pulling th e oven out to get behind it and sliding it back in.
Was this helpful?
Thank you for voting!
dropped stove forward, handle broke and trim around it also broke.
5 of 6 people found this instruction helpful.
  • HERLIN from BOERNE, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Unsrewed what was left of the trim and oven handle. Just 4 screws total, then replaced the 2 screws of the trim and the 2 screws on handle.
Finished! Replacement parts fit perfect!!! Thanks a milliion!
Was this helpful?
Thank you for voting!
Bake element was taking time to warm up
5 of 6 people found this instruction helpful.
  • Jean-Claude from Miami, FL
  • Really Easy
  • Less than 15 mins
Wire connection was damaged, replaced end piece
Was this helpful?
Thank you for voting!
Broken rear stove drawer glide
5 of 7 people found this instruction helpful.
  • John from Maysville, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed drawer, after removing the 50# of junk in the drawer, Used screw driver to remove screw that holds glide to drawer and then place new part into place put screw into hole and tightened screw. Replaced drawer and told wife not to put 50# of junk back into the drawer.
Was this helpful?
Thank you for voting!
element went out on the stove
5 of 7 people found this instruction helpful.
  • christopher from harrisburg, NC
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My wife did it! I got home one night and my wife had done it! That's how easy it was! Trust me, he is no handyman (woman) but she did it by herself. The part came fast, the price was better than any one else's
Was this helpful?
Thank you for voting!
Electric contact connection melted, shorting out the range.
4 of 4 people found this instruction helpful.
  • Vincent from SHILOH, IL
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
After unplugging electric service, loosened 3 Philips-head screws holding 3 wires from range and loosened 3 nuts holding wires from electric cord. Also removed 1 Philips-head screw holding grounding tab. Removed 2 Philips-head screws and removed the old block. Mounted new block with those screws and replaced and tightened all 6 wires.
Was this helpful?
Thank you for voting!
Block had melted.R
4 of 4 people found this instruction helpful.
  • Thomas H. from COCOA, FL
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Removed old terminal block & replaced with new one. Very simple. Did NOT have to replace cover as stated you should. Shipping could have been a little faster. Will definetly try this site again.
Was this helpful?
Thank you for voting!
All Instructions for the TES355VB0
31 - 45 of 195