TES355MQ2 Estate Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Demon Possession
1 person
found this instruction helpful.
-
Kevin from Greensboro, NC
- Really Easy
- Less than 15 mins
Our repair was extrodinarily easy. As my husband was taking out the old element and the oven was off, the element heated up and actually burned him. He readjusted it and it refused to heat again. We figured at that point that there must be a short, so we never even opened the box with the new element. A short time later we decided to use
... Read more
the top of the stove for soup and a small fire started in the oven. We turned off the braker at that point and ordered a new oven.
Read less
Was this helpful?
Thank you for voting!
Broiler would not shut off--had to unplug the stove
6 of 17 people
found this instruction helpful.
-
LOIS from ALTA VISTA, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
Just connected the part---very simple to fix
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people
found this instruction helpful.
-
Mary from Duarte, CA
- Really Easy
- Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
The side trim on the glass door needed to be replaced.
1 of 2 people
found this instruction helpful.
-
Mary from LARAMIE, WY
- Easy
- Less than 15 mins
-
Screw drivers
After we put the latch pins in, the door was easily lifted off. We placed the door on the table and unscrewed the trim pieces. The new trim pieces went into place after we cleaned the door. We slipped the door back on the oven and removed the hinge pins.
Was this helpful?
Thank you for voting!
Light would not light
1 of 2 people
found this instruction helpful.
-
Frank from LEBANON, VA
- Easy
- 15 - 30 mins
-
Pliers
Pop old one out and new one in
Was this helpful?
Thank you for voting!
Oven temperature was 50 degrees off
1 of 2 people
found this instruction helpful.
-
Gregory from BRIDGEBORO, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Unplugged stove.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
oven light not working
2 of 6 people
found this instruction helpful.
-
Richard from Gaylord, MI
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.
pleased with service from your company.
pleased with service from your company.
Was this helpful?
Thank you for voting!
range handle fell off and screw got lost
1 of 4 people
found this instruction helpful.
-
Frances from palm beach gardens, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
It was worth the money for that little screw, since I didn't have to run all over trying to find the right one.
Was this helpful?
Thank you for voting!
Inside Light would not work
2 of 7 people
found this instruction helpful.
-
Dan from Caddo Mills, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
door glide broken
0 of 1 people
found this instruction helpful.
-
David from Port Orange, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
removed the old ones.then installed the new ones.
Was this helpful?
Thank you for voting!
Switch had burned out due to faulty wiring by electrician when appliance first installed
1 of 4 people
found this instruction helpful.
-
Doriss from Cartersville, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
my son simply replaced the switch, so now I have a working oven light once again
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!