My Orders
TCW2013OS (ASSEELC) LG Washer Dryer Combo - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plunger/magnet capsule fell out of door recepticale because plastic locking tab broke off
6 of 6 people
found this instruction helpful.
-
Jo Ann from WYLIE, TX
- Really Easy
- Less than 15 mins
Simply inserted new plunger/magnet back into door with thumb&finger until you hear the little locking tabs click. No tools required.
Was this helpful?
Thank you for voting!
w/d repeatedly fills with water during warm or hot loads
5 of 5 people
found this instruction helpful.
-
kevin from WASHINGTON, DC
- Very Easy
- Less than 15 mins
-
Screw drivers
E. Z. hardest part (which isn't hard) was moving the appliance to reach the back, then putting the appliance back into place. the actual repair (swapping out valve) took less time than that to do.
Was this helpful?
Thank you for voting!
Magnetic Door Plunger would stay on washer and not stay in door.
6 of 8 people
found this instruction helpful.
-
SHIRLEY from HARTFORD CITY, IN
- Very Easy
- Less than 15 mins
Use just your finger to push it into place. VERY EASY
Was this helpful?
Thank you for voting!
None
5 of 5 people
found this instruction helpful.
-
Keineth from DALLAS, TX
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Took the one off that was leaking and put the other one on
Was this helpful?
Thank you for voting!
Washer shook in spin cycle
4 of 4 people
found this instruction helpful.
-
Kenneth from CONESUS, NY
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
Took front of machine off to access 2 shocks, put back together then removed panel in back to access third shock, watched YouTube video first so things went smooth
Was this helpful?
Thank you for voting!
Drum spring broke
4 of 4 people
found this instruction helpful.
-
Todd from LAKEWOOD, CO
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Removed top panal found broken parts and pieces, replaced spring and plastic spring holder. Straightened out and reattached drum front boot.
Was this helpful?
Thank you for voting!
broken retainer
3 of 3 people
found this instruction helpful.
-
Gloria D. from MEMPHIS, TN
- Very Easy
- Less than 15 mins
pops right into hole
Was this helpful?
Thank you for voting!
Leak in top washer hose
3 of 3 people
found this instruction helpful.
-
Jason from S HAMILTON, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Super straightforward to diagnose and repair.
There was puddle under the washer.
I removed the top (screws in rear, slide top toward rear slightly and lift) and followed the trail of water up to the top washer hose between the drum and detergent tray.
Two hose clamps to remove and replace, then replace the ... Read more top and ready to go.
There was puddle under the washer.
I removed the top (screws in rear, slide top toward rear slightly and lift) and followed the trail of water up to the top washer hose between the drum and detergent tray.
Two hose clamps to remove and replace, then replace the ... Read more top and ready to go.
Read less
Was this helpful?
Thank you for voting!
Magnetic door plunger broke off, then got stuck inside the door and couldn't be removed for replacement.
3 of 4 people
found this instruction helpful.
-
Anne from MONROE, NY
- Really Easy
- Less than 15 mins
I used another magnet to pull the old plunger out of the door and replaced it with the new part.
Was this helpful?
Thank you for voting!
Door plunger had a broken tooth and would not stay in place.
3 of 4 people
found this instruction helpful.
-
Larry from IOWA PARK, TX
- Very Easy
- Less than 15 mins
Just put in the new one.
Was this helpful?
Thank you for voting!
Leaking hose
4 of 7 people
found this instruction helpful.
-
David from SAINT CHARLES, IL
- Very Easy
- 15 - 30 mins
-
Screw drivers
2 hose clamps and a hose, easy! This would be a very common cause of leaks in washers due to all the movement inside.
Was this helpful?
Thank you for voting!
TE error. Replaced heater / thermistor assembly.
4 of 7 people
found this instruction helpful.
-
Andrew from BOTHELL, WA
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
removed top and front. heater is at the base of the tub. the nut compresses the rubber seal and may take some wiggling to remove the old one.
Was this helpful?
Thank you for voting!
Dishwasher would not fill
2 of 2 people
found this instruction helpful.
-
Jesse from CARNEGIE, PA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers
Used Youtube to look for a set of repair instructions. From start to end 35 min.
The difficult part was getting the door back on. Only 1 Youtube video I watched stated Do not remove the 2 center screws at the top. Wish I had seen that video first.
Overall very easy to do.
The difficult part was getting the door back on. Only 1 Youtube video I watched stated Do not remove the 2 center screws at the top. Wish I had seen that video first.
Overall very easy to do.
Was this helpful?
Thank you for voting!
CONNECTOR NOZZLE, LEAKED
2 of 2 people
found this instruction helpful.
-
Sergio from MADISON, WI
- Very Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Took off top of washer to get access to connector nozzle, which is on top front of washer rubber boot. removed old nozzle, installed new one. Easy peasy
Was this helpful?
Thank you for voting!
water & soap leaked into / on the tub bearings causing Bearing failure
2 of 2 people
found this instruction helpful.
-
Michael from SUGAR GROVE, OH
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set
pretty straight forward repair,lots & lots of parts to clean :-)
Was this helpful?
Thank you for voting!