EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

SDL20KCSBBS General Electric Refrigerator - Instructions

All Instructions for the SDL20KCSBBS
121 - 135 of 542

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Main Board failed
2 of 2 people found this instruction helpful.
  • Joseph from Marrero, LA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Part arrived 2 days before anticipated. I was able to keep my fridge running long enough to get the new part in, which took no time at all. The Main Board relay would start clicking and the compressor would shut down. By unplugging the top right plug for a minute and plugging it back in I was able to keep it running for a few hours at a t ime. Good enough to keep my food from going bad. Thr part was an easy plug in replacement, was a good price, and works great.
Was this helpful?
Thank you for voting!
Fan was not running to circulate the air; found resistors burned on main board
2 of 2 people found this instruction helpful.
  • Greg from Damon, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed the board cover from the back, removed old board, installed new board, installed cover.
Was this helpful?
Thank you for voting!
Lost Temperature in Refrigerator and Freezer, making clicking noise
2 of 2 people found this instruction helpful.
  • john from Madison, OH
  • Easy
  • Less than 15 mins
  • Screw drivers
Removed main control board cover on back of refrigerator (3 screws). Unplugged power to refrigerator and removed electrical connections to control board using a screwdriver. Using a screwdriver disconnected (4) plastic self -locking prongs holding the board. Matched new replacement board with old board. Plugged in electrical connection s to new board. Snapped main control board onto (4) self- locking prongs. Reinstalled cover (3) screws. Plugged in refrigerator and tested refrigerator operation.
Was this helpful?
Thank you for voting!
water not being drawn up into icemaker
3 of 5 people found this instruction helpful.
  • timothy from aberdeen, MD
  • Really Easy
  • Less than 15 mins
  • Pliers
unplugged the old valve and disconnected the water line, then reconnected water line on new valve and plugged it in. It was an easy process but unfortunately that did not fix the problem. It is the ice maker it self so I will be ordering a replacement ice maker.
Was this helpful?
Thank you for voting!
No Cooling on either freezer or refrigerator
2 of 2 people found this instruction helpful.
  • jaime from SYLMAR, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Everything seemed to be working right, but no cooling, so I tried turning on and off the switch that turns the light on 5 times within two seconds, refrigerator did not shot. so I removed the main board and I notice a short had taken place on one of the relay legs. I ordered the main board and replaced it. The main board is on the back of the freezer covered with a sheet metal panel about 8"x8" and is secured with hex sheet metal screws. Everything is working now. Please make sure to unplug the unit from power before removing the main board.
Was this helpful?
Thank you for voting!
Water leaking from bottom of refrigerator
2 of 2 people found this instruction helpful.
  • Bill from ORO VALLEY, AZ
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
I'm not a DIY-er, and wasn't sure a 20 year old refrigerator was worth the repair, but for $30 I could afford to be wrong. The swap is pretty intuitive, especially in my case since the problem was that the water tube from the valve to the ice maker had detached from the coupling. So I didn't have to cut anything off, just inserted the tube into the new valve. Reconnected the supply line, screwed the assembly back on the refer, and Bob's your uncle. Other than unloading some canned goods to lighten the refer, longest process was finding the right size nut driver in my disorganized tool tray. Be aware, there are NO instructions included with the part. Found a good video on you tube that confirmed the obvious. Glad I took a shot!
Was this helpful?
Thank you for voting!
Refridgerator stopped making ice
2 of 2 people found this instruction helpful.
  • Doug from COPE, CO
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed the old water valve from back of refrigerator by using a screwdriver. Pulled water line off old valve that runs into the fridge and inserted it into the new part. I used a pair of pliers to take off water line that runs into the water valve from the house. Screwed the water line back onto the new valve. Took about 10 minutes.
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
The shelf was broken and the ice tray would not go all the way in.
2 of 2 people found this instruction helpful.
  • Norma from NEWPORT NEWS, VA
  • Really Easy
  • Less than 15 mins
I took out the broken shelf and slid in the new one. No tools took all of 15 seconds.
Was this helpful?
Thank you for voting!
Ice maker stopped working
3 of 5 people found this instruction helpful.
  • Mary from WESTON, CT
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Installation could not have been easier!
Was this helpful?
Thank you for voting!
No ice from door, but did have water
4 of 8 people found this instruction helpful.
  • Rich from san marcos, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I got the wrong switch before so just need to put the right 1 in. Super easy, pop off old, plug in new, click back into place. Done. REALLY REALLY EASY for anyone to do
Was this helpful?
Thank you for voting!
freezer door handle kept falling off
3 of 5 people found this instruction helpful.
  • Laura from Glenview, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Finding your site saved me $200.00 ! I thought I needed a new door handle but all I needed was the brackets to hold the handle on the door. The diagram you displayed of my refrigerator helped me focus on what I really needed to fix my problem. I ordered the parts I needed and was expecting the parts I order to come in 7 working days, I received them in 2 days. Thanks for your help, Laura
Was this helpful?
Thank you for voting!
Temp panel flashed "hrs", refrigerator would not work
2 of 2 people found this instruction helpful.
  • Christopher from Chicago, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Remove back panel to expose the control board. Simply unplug cables from old board and pull the board out, no tools required. Put new board in place and replace the cables. Very easy.
Was this helpful?
Thank you for voting!
freezer stoped freezing
2 of 2 people found this instruction helpful.
  • paul from ENDICOTT, NY
  • Very Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
my freezer quit freezing, it would freeze for one day, thaw the next, so I went online, found PARTS SELECT, LOOKED UP MY MODEL #, come to find out it needed three parts to keep my freezer to freeze, first part was a thermistor a small PART took me longer to remove all the covers, and shelving, PULLED THE OLD OUT, CUT THE WIERS TO SIZE, AND REINSTALLED, IT WELL! THAT WASN'T ENOUGH THE FREEZER STILL DIDN'T FREEZE IT THOUT IT WAS A COOL WORMING OVEN, HAD TO INSTALL THE THERMISTOR I, SO I DID, TEN MIN, NOW I THOUGHT THAT WAS IT BECAUSE IT STAYED FROZEN FOR A WEAK, HAVE YOU EVER EATEN SOUPY ICE CREAM? SO BACK TO PARTS SELECT, THIS TIME I BOUGHT ONE MORE PT, THE RUN CAPACITOR, FIVE MIN, THAT/S ALL IT TOOK TO INSTALL. I DID NOT KNOW AT THE TIME YOU NEED THE THREE OF THEM TO RUN THE FREEZER ONE TO KEEP THE TEMP., ONE TO KEEP THE FAN RUNNING THE WAY IT SHOULD, AND THE THIRD TO MAKE SURE THE OTHER TWO KEEP RUNNING. NOW I CAN SET IT AT 4- 5 AND. FREEZE.
Was this helpful?
Thank you for voting!
The Refridgerator and Freezer were not cooling.
2 of 2 people found this instruction helpful.
  • Frank from VERO BEACH, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Installing the part repaired the fridge and freezer immediately.
Was this helpful?
Thank you for voting!
All Instructions for the SDL20KCSBBS
121 - 135 of 542