SBK26DA Amana Range - Parts

This lower oven bake element is a high-performance heating component designed for electric ranges and wall ovens. Located at the bottom of the oven cavity, it delivers 2100 watts of power at 240 volts to provide consistent heat for baking. Engineered for durability and even heat distribution, this element is a direct replacement for units...Read more that are burned out, broken, or producing uneven results. Common symptoms of a failing element include weak or no heat, inconsistent baking, or visible damage. Replacing the bake element restores proper oven function and ensures reliable cooking performance.

If your dryer is noisy, will not tumble, or is not producing enough heat, you may need to replace the blower wheel. This part is white in color, and is made of plastic. This part is approximately 8 inches in diameter. The blower wheel is located near the bottom of your dryer cabinet. To access it for this repair, you will need to remove b...Read moreoth the front panel and the front bulkhead assembly. Before you begin this repair, be sure to disconnect the power source to the dryer. To complete this repair, you will need a 5/16 inch nut driver, a 1/4 inch nut driver, a pair of locking pliers and a 7/8 socket with a short extension and a ratchet.

This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.

Sold Individually. This knob accepts a D-shaped shaft.

This black oven thermostat knob is just over two inches in diameter. It has a chrome trim around the perimeter of the knob and white lettering denoting the various temperature within the oven.

Sold individually.

This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

This part goes behind the selector knob.