Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Taupe/gray stove grates stained/discolored
31 of 32 peoplefound this instruction helpful.
Lee from N. Merrick, NY
Really Easy
Less than 15 mins
I could not get these grates clean, so I called Partselect and they helped me find the model of the same stove that had black grates, drip pans, and burner caps. I ordered the black grates one afternoon, and without paying for expedited shipping, they arrived the next day! They were in original GE boxes (since they make Hotpoint). I am
... Read more happy about the whole experience.
Read less
Was this helpful?
Thank you for voting!
A lightining Strike fried the circuit board
25 of 31 peoplefound this instruction helpful.
Timothy from Forney, TX
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
A G.E. tech came out and quoted $500 to replace the circuit board. I unbolted the board myself and used the camera in my phone to take a picture of the wiring. Then I came to PartSelect.com and using their diagrams found the replacement board for $75. It came in the mail a few days later. I used to picture in my phone to reconnect all the
... Read more wires, bolted everything back up and baked some cookies. Thanks PartSelect for making my repair job simple and inexpensive.
Read less
Was this helpful?
Thank you for voting!
I broke the oriface lines
25 of 32 peoplefound this instruction helpful.
EARL from Buda, TX
Easy
30 - 60 mins
Screw drivers
First I needed the correct model number & the correct part numbers for the two front tube assemblies. After that well.... I removed everything on top of the stove. I then proceded to remove all the torx screws for each orifice holder bracket & igniter wires so i could raise the top lid ( without this step you will wind up replacing more t
... Read morehan one tube assembly!) Be careful when removing color coded wires so that they work with the correct burner. Remove compression nut to burner valve... i used a crowfoot. remove orifice holder from bracket & install new holder ( onto bracket). Install orifice assembly to burner valve ( do not over tighten), re-install wires to igniters, lower lid, and re-install torx screws. The correct parts require little effort to align. Last of all, test burners and check for leaks. Thanks for reading, I will continue to learn from my mistakes!
Read less
Was this helpful?
Thank you for voting!
Needed to replace the drip pans.
22 of 24 peoplefound this instruction helpful.
Shannon from Blacklick, OH
Really Easy
Less than 15 mins
Really self explanatory. Removed the old drip pans and put in the new. No tools required. However, I would like to say I received the parts the day after I ordered them. EXTREMELY FAST SHIPPING!!
openend stove top disconnected wire pushed out old sparker inserted new one closed lid game over
Was this helpful?
Thank you for voting!
Pies Boiled Over And Baked On Oven Bottom
20 of 25 peoplefound this instruction helpful.
Marjorie from Yucca Valley, CA
Really Easy
Less than 15 mins
Screw drivers
Removed the two screws put the heat shield off the old one onto the new one put new bottom in and tightened two screws. Done #38. 69 Cost of part with shipping cost included.
Was this helpful?
Thank you for voting!
Oven rack missing when I purchased the house
18 of 28 peoplefound this instruction helpful.
Patricia from Houston, TX
Really Easy
Less than 15 mins
I was very pleased with how quickly the new oven rack arrived and it was a perfect fit. Thanks.
Was this helpful?
Thank you for voting!
the oven handle broke during delivery
15 of 19 peoplefound this instruction helpful.
william from new orleans, LA
Easy
Less than 15 mins
Nutdriver, Screw drivers
I remove the damage handle from the oven door,Then i install the new door handle with no problem.The tools i used was a hand nut driver and a phillip #3driver.
Was this helpful?
Thank you for voting!
electric storm fried oven display
11 of 12 peoplefound this instruction helpful.
Sharon from Beverly, NJ
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
I ordered a new display from the internet. I removed the panel where the display is housed, unscrewed the entire display assembly and unplugged all wires connecting it. (I made a drawing and noted colors of wires) I removed adhesive face of display and replaced it on the new display. I then screwed in the display and reconnected the wires
... Read more as per my notes. I reassembled the panel and applied power and it worked like new.
Read less
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 46 peoplefound this instruction helpful.
Leo from TWIN FALLS, ID
Really Easy
Less than 15 mins
Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
Needed extra oven space
11 of 15 peoplefound this instruction helpful.
noreen from flushing, NY
Really Easy
Less than 15 mins
Thanksgiving was coming and I needed extra oven space. So I ordered an additional rack. Installation ... just put it in the oven. My part came the day after I ordered it.
Was this helpful?
Thank you for voting!
burner would not light properly and flame uneven around the burner
9 of 10 peoplefound this instruction helpful.
Bret from South Haven, MI
Really Easy
Less than 15 mins
determined that the top of the burner was melted and malformed. Repair was simple: lifted off the damaged burner and slipped the new one in place.
Was this helpful?
Thank you for voting!
Oven bottom tray would not clean up.Looked like finish was off it
11 of 17 peoplefound this instruction helpful.
Jim from 29 Palms, CA
Really Easy
Less than 15 mins
Screw drivers
removed two screws and took out bottom tray and put the new one in and replaced the screws.DId it my self.
Was this helpful?
Thank you for voting!
I placed a plastic container on the burner and melted it!!!
7 of 7 peoplefound this instruction helpful.
Antonio from West New York, NJ
Really Easy
Less than 15 mins
I removed the four burners and the two metal tops, easy as one, two, three!!
Twice I ordered the oven light bulb & each time the light bulb was defected
17 of 37 peoplefound this instruction helpful.
Barbara from BELLEVUE, WA
Very Difficult
Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read moreiance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
My Orders
