My Orders
RGB745BEH2CT Hotpoint Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
tube that sends gas to burners broke both left and right front this happen due to opening the range hood to clean inside
1 person
found this instruction helpful.
I turn gas off to the appliance then I remove the old gas lines and installed the new ones. I did find it easlier to attach the line at the burner knob first then attach it to the burner.
Other Parts Used:
Was this helpful?
Thank you for voting!
the tubes both leaked
1 person
found this instruction helpful.
replacement was a snap and took only a small adjustable wrench and a flashlight. asome slight bending of the tube was required, but a gentle hand solved the problem easily.
Other Parts Used:
Was this helpful?
Thank you for voting!
while cleaning I broke the tubes either lifting or closing the top.
2 of 4 people
found this instruction helpful.
I bent the tubes very slghtly to rech the area of attachment. I first screwed them with my hand then tightened them with an adjstable wrench. It was really simple and fast.
Other Parts Used:
Was this helpful?
Thank you for voting!
gas burners not heating evenly
1 of 2 people
found this instruction helpful.
remove old burner, put new in place
Other Parts Used:
Was this helpful?
Thank you for voting!
burners would not light
2 of 5 people
found this instruction helpful.
Remove the old tubes. Lift the lid NO MORE THAN FOUR INCHES. !!!!! Feel for the connections on the switch ends and attach losely. Carefully ( with some slight bending ) attach tubes to the burners. Tighten all connections. Do not over tighten.
The tubes broke originaly because , attempting to clean the area I lifted the lid too h ... Read more igh.
The tubes broke originaly because , attempting to clean the area I lifted the lid too h ... Read more igh.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Front burners had to be lit with lighter
2 of 5 people
found this instruction helpful.
My son lifted up cooktop, unscrewed the front plate to gain access to old tube burners, removed and replaced with new parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
cosmetic look of the stove top
1 of 2 people
found this instruction helpful.
changed double burmer pans
Other Parts Used:
Was this helpful?
Thank you for voting!
replace burner pans
1 of 2 people
found this instruction helpful.
take off top grates,place new one's in time 20 sec.
Other Parts Used:
Was this helpful?
Thank you for voting!