My Orders
- Home
- PP7030SJ2SS
- Instructions
PP7030SJ2SS General Electric Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced radiant burner element glass top range
8 of 9 people
found this instruction helpful.
-
Denise from SENECAVILLE, OH
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First; turn off breaker to stove.
Second; remove two Phillips head screws that hold the top on, located in front, underneath, will have to open the oven door to see.
Third; prop the top up.
Four; disconnect wire clips of old element.
Five; plug in new wire clips of new element.
Six; unprop the top and realign ... Read more the top.
Seven; replace the two Phillips head screws to secure the top, then close oven door.
Eight; turn breaker back on.
Done and Back in Action! You Can Do This!
Second; remove two Phillips head screws that hold the top on, located in front, underneath, will have to open the oven door to see.
Third; prop the top up.
Four; disconnect wire clips of old element.
Five; plug in new wire clips of new element.
Six; unprop the top and realign ... Read more the top.
Seven; replace the two Phillips head screws to secure the top, then close oven door.
Eight; turn breaker back on.
Done and Back in Action! You Can Do This!
Read less
Was this helpful?
Thank you for voting!
Element out LF
9 of 13 people
found this instruction helpful.
-
Brian from HAGERSTOWN, MD
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Unplug stove.2 screws out ,lift top ,disconnect bad element, connect new element, put top down .2 screws in .plug stove back in...EASY PEASY
Was this helpful?
Thank you for voting!
Stovetop radiant burner went out
6 of 10 people
found this instruction helpful.
-
Frank from Marietta, GA
- Easy
- 15 - 30 mins
-
Screw drivers
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
Was this helpful?
Thank you for voting!
Burner burned out
4 of 5 people
found this instruction helpful.
-
John from TABERNACLE, NJ
- Very Easy
- Less than 15 mins
-
Screw drivers
YouTube to review, had 1 person hold stove top for ease. Simple repair
Was this helpful?
Thank you for voting!
Installing new cooktop in an island
2 of 5 people
found this instruction helpful.
-
Donald E from SALEM, AL
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
The included brackets would not work, so I ordered the alternate installation kit from this site and it made the job go easy.Thanks
Was this helpful?
Thank you for voting!
Burner not operational.
-
Gerald from Philadelphia, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Disconnected power supply. Removed damaged element by releasing retainer clips and unplugging wire contacts. Replaced with new element.
Was this helpful?
Thank you for voting!