PP5020AV Poulan Chainsaw - Parts

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.

The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.

This is an OEM replacement recoil kit supplied directly by Poulan. The starter pulley spins the flywheel to start the engine when you pull the starter rope. The most common reason for replacing the starter pulley is if the starter rope won't retract. Please note this kit does NOT include the rope and rewind spring. When replacing this part make sure to disconnect the spark plug wire before starting repair.

This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris from entering the fuel tank. If the fuel cap is stripped or missing the O-ring, it can cause a leak, and will need to be replaced. To repla...Read morece the fuel cap simply screw the old one out and screw the new one in, ensuring you have a tight seal. This is an authentic OEM part sourced directly from the manufacturer.

This is the replacement bar adjustment kit for your chainsaw. The kit includes a retainer ring, pin, and the adjustment bolt. The chainsaw bar adjustment kit is used to adjust the tension of the bar, which keeps the cutting chain tight and allows the chainsaw to operate properly. Over time, and after normal operation, the chain for your c...Read morehainsaw can stretch and become loose on the guide bar. If it becomes too loose it can come off during operation and this can cause damage or injury. If your chain is becoming loose, it is important to use this bar adjustment kit to fix the issue. This is an OEM part sourced directly from the manufacturer.

Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal. If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if ne...Read morecessary. You will need a screwdriver to complete this repair. Customers rate this repair as Easy.

Dive into an efficient and effortless DIY repair work with this Poulan Carburetor Air Valve Assembly. Designed meticulously for chainsaws, it plays an integral role in controlling the precise airflow from the air filter housing into the carburetor. To ensure maximum safety, make sure to cool the engine and drain the gas tank before instal...Read moreling this durable assembly. It's always recommended to engage with such tasks in well-ventilated areas, and don't forget to put on work gloves to safeguard your hands. Forge ahead with Poulan's innovative and trustworthy trimmer parts for an unmatched working experience.

Genuine Manufacturer Approved replacement part used on specific Poulan Gas Chainsaws. This item is made out of Metal and it is Sold Individually. This part plays an important role as it provides spring action in the Pull Starter.

This is an OEM sourced replacement part used on Poulan chainsaws. A centrifugal clutch uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Often centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on e...Read morequipment performance will determine when the clutch requires attention. This assembly includes metal clutch drum and a sprocket. To replace this item you would need a wrench set. • Remove the chain brake, bar, and chain. • Remove the cover and spark plug. • Bind the piston. (If you skip this step, the clutch will spin freely and you won't be able to remove it. If you have a piston stopper, just thread it into the spark plug hole. ) • Remove the clutch. • Replace old drum with a new assembly • Seat the clutch. • Unbind the piston. • Secure the bar, chain, and chain brake. • Tension the chain

The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.