Quick Question!

Have you ever purchased from PartSelect.com before?

Authentic Parts
Models > PDW9280N00SS

PDW9280N00SS General Electric Dishwasher - Overview

Get Parts and Repair Help for PDW9280N00SS

If you know the dishwasher repair part you need, you can browse the list of all parts on the PDW9280N00SS, or you can search by name or part description. You can also find your part by where it is located on the PDW9280N00SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for PDW9280N00SS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the PDW9280N00SS

[Viewing 5 of 5]
BODY PARTS
ESCUTCHEON & DOOR ASSEMBLY
LOWER RACK ASSEMBLY
MOTOR-PUMP MECHANISM
UPPER RACK ASSEMBLY
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.37
In Stock

Dishrack Rollers and Axles - Kit of 8

If you are having trouble rolling your dishrack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage....

$19.23
In Stock

Silverware Basket

This is a basket for washing flatware or silverware in your dishwasher.

$20.56
In Stock

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the de...

$48.41
In Stock

Detergent Dispenser with Rinse Cap

This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, close, dispense detergent properly, or the dishes are coming out of the dishwasher dirty, replacing this part can solve these problems. The tools needed for this installation project are a #2 Phillips screwdriver and needle-nose pliers. To repair, first remove screws from the bottom of the inner door panel. Next, remove connecters, wires, and screws from the dispenser to access it and replace with new dispenser. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Unplug dishwasher from power source as a safety precaution.

$3.92
In Stock

Upper Rack End Cap

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevent...

$157.85
In Stock

Lower Dishrack with Wheels

This dishrack includes the wheels.

$4.88
In Stock

Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

$25.43
In Stock

Tub Gasket

This gasket lines the inside cabinet in the dishwasher.

$4.46
In Stock

Hinge Arm Link

$2.12
In Stock

Screw 8-16 hxw 1/2 ss

Sold Individually.

Common Symptoms of the PDW9280N00SS

[Viewing 10 of 10]
Not cleaning dishes proper

Fixed by these parts

Show All
Leaking

Fixed by these parts

Show All
Not draining

Fixed by these parts

Show All
Will not dispense detergen

Fixed by these parts

Show All
Door latch failure

Fixed by these parts

Show All
Noisy

Fixed by these parts

Show All
Will not fill with water

Fixed by these parts

Show All
Door won’t close

Fixed by these parts

Show All
Not drying dishes properly

Fixed by these parts

Show All
Will Not Start

Fixed by these parts

Show All

Replacing the Detergent Dispenser with Rinse Cap

Replacing the Hinge Arm Link

Replacing the Check Valve Flapper

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower wheel axles worn out

  • Customer: Glen from Alpine, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 950 of 483 people found this instruction helpful
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!! read more

My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.

  • Customer: Michelle from Weddington, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 744 of 376 people found this instruction helpful
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts. read more

The wheels kept falling off the right side of the bottom rack; it was extremely annoying. We basically had to lift the bottom rack to get it in and out of the dishwasher.

  • Customer: Jean from Richmond, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 450 of 218 people found this instruction helpful
I removed the old wheels & studs on the right side of the bottom rack of the dishwasher, and I gleefully THREW THEM ALL OUT! HA HA!

Then I put the nice new rollers on the studs, and then I put them on the rack.

Helpful hints for others beleaguered by this design problem:

1) Be sure to get new studs - that's the part tha... read more

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.