EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PDW9280J10SS General Electric Dishwasher - Instructions

All Instructions for the PDW9280J10SS
91 - 105 of 432

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Older wheels had broken clips.
2 of 2 people found this instruction helpful.
  • Wayne from SEASIDE, OR
  • Very Easy
  • Less than 15 mins
Simply remove broken wheels and clip on replacements. No tools are necessary for this fix and the replacement was inexpensive and easy to install. The kit worked beautifully.
Was this helpful?
Thank you for voting!
Plastic hinge arm link broke
2 of 2 people found this instruction helpful.
  • Eric from EAST MEADOW, NY
  • Easy
  • 15 - 30 mins
  • Pliers
Squeeze the new link to the cable hook with pliers while locking the vise grip to the cable for easier handling. Then, using the vise grip on the cable, hook the other end of the link to the dishwasher door hook
Was this helpful?
Thank you for voting!
Old parts showing wear
2 of 2 people found this instruction helpful.
  • Suzanne from CHEYENNE, WY
  • Really Easy
  • Less than 15 mins
Watched a YouTube video on disassembly, parts replacement, and reassembly.
Was this helpful?
Thank you for voting!
emit holes partially plugged and metal of lower arm separated
2 of 2 people found this instruction helpful.
  • Mary from LARAMIE, WY
  • Really Easy
  • Less than 15 mins
  • Socket set
lower arm lifts off and new sets right on. The upper arm needed a "holding" screw removed (from under the shelf) and replaced with the new arm.
Was this helpful?
Thank you for voting!
Rack was rusted and broken.
2 of 2 people found this instruction helpful.
  • Amelia from PEORIA, IL
  • Very Easy
  • Less than 15 mins
It was a very simple replacement. I took the old one out and rolled the new one in. It took less than 5 minutes!
Was this helpful?
Thank you for voting!
Original wheels kept falling off, rack would go off track and it drove me crazy
2 of 2 people found this instruction helpful.
  • Chris from Medina, MN
  • Really Easy
  • Less than 15 mins
Simple, took five minutes, no tools, problem solved.
Was this helpful?
Thank you for voting!
Broken spring on door.
2 of 2 people found this instruction helpful.
  • Ron from SOUTHPORT, NC
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
See GE web site for repair instructions. Take out screws at top of door. Slide unit out there is a spring on each side of the door just look at the good one for details. Easy fix. About 30 minutes.
Was this helpful?
Thank you for voting!
Dishes Weren't Getting Clean At All
2 of 2 people found this instruction helpful.
  • James from HGHLNDS RANCH, CO
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
The sump was very clogged with caulk like crud that we think was a chemical reaction from soap that was used the first two years. When I first started troubleshooting, the sump seemed to be the problem, so I replaced that. There was a small hose on the sump that was broken so it made sense to replace it anyhow.

When that didn 't help I put the dishwasher into service mode and observed that there just wasn't enough water to spin the sprayer. Therefore it was a water quantity problem, which can be caused by either the Water Inlet Valve or the Flood Switch.

I ordered both the Water Inlet Valve and the Flood Switch, just in case. I replaced the valve first and when that worked I did not install the switch.

Installation was performed with the dishwasher still inserted in the cabinet. If you have big hands, pull the dishwasher out. With sockets and nut drivers, I was able to remove the assembly. After pulling it out enough to clear the dishwasher, I was able to get a screwdriver on the outlet side clamp and a wrench on the inlet side hose.

My old valve had a 90° elbow on it and that was difficult to remove. Installing the elbow on the new valve was just as bad. The valves don't have enough clearance to get a wrench on them to keep them from turning while the elbow is tightened.

TIP: Take a picture of the valve before removing/disconnecting anything. I don't know if the electrical connector can attach either way but I made sure to put it back on exactly the same way it was.
Was this helpful?
Thank you for voting!
Blocked inlet valve
2 of 2 people found this instruction helpful.
  • Timothy from DURHAM, NC
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed kick panel and pulled out the unit from cabinet carefully. Turned off water and power. Removed the water feed and used an aluminum pie tin line a low-profile drip pan to catch the extra water and used a scrap towel to clean the dust and extra water spilling out. Used sockets and wrench to remove the old inlet and screwed out the h ousing to examine the old inlet. No real way to clean it. Honestly, I don’t see a reason for the filter. There’s no way to replace it and it’s not easy to change out anyway. The particles were so small they could have passed through and not harmed the system. A better and more practical place for any filter would be just in front of the inlet that could just pop in every 2-3 years as needed preventatively in 5 minutes. Anyway, I reassembled and tested. Water flow was great. I think it cleans better too because the hot water fills the plastic reservoir faster and stays hot to clean more effectively.
Was this helpful?
Thank you for voting!
Dishes were not drying inside the dishwasher after the dishwasher cycle completed
2 of 2 people found this instruction helpful.
  • Christopher from GLEN ALLEN, VA
  • Easy
  • 30 - 60 mins
  • Wrench (Adjustable)
The installation video that is on the website with the part is very helpful & easy to follow. The wires that attach to the heating element & the nuts that hold it in place are actually located a few inches off the ground so I didn't need to tip the machine over to pull them out & unscrew the nuts. All I had to do was unscrew the screws that hold the dishwasher in place under the counter next to the sink, pull it out & was able to reach the wires underneath it.
The actual repair took me less than 30 minutes, I marked it as 30-60 because during the somehow the water line going to the dishwasher had come loose from under the sink (not at the dishwasher) & because of this I had to stop midway to deal with some loose water & tighten things back up. I would recommend following the video, there really isn't much more to add that would be helpful.
Was this helpful?
Thank you for voting!
worn wheels on upper rack
4 of 9 people found this instruction helpful.
  • Paul from Oakland, NJ
  • Easy
  • Less than 15 mins
  • Screw drivers
parts were easy to find and the repair was a breeze. Thanks for your help.
Was this helpful?
Thank you for voting!
Old rack was rusted out and missing most of the wheels.
2 of 3 people found this instruction helpful.
  • Jim from Palatka, FL
  • Really Easy
  • Less than 15 mins
Easiest repair ever. My new rack arrived in three days, opened the box and slid it in. Better quality than the original. Excellent service!
Was this helpful?
Thank you for voting!
clips on wheeles were broken
2 of 3 people found this instruction helpful.
  • sean from oakland gardenns, NY
  • Easy
  • Less than 15 mins
replaced clips that were much better made.
Was this helpful?
Thank you for voting!
The detergent dispenser latch was broken
2 of 3 people found this instruction helpful.
  • KEVIN from MACKINAW, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
The repair was easy. Removed all the screws from the inside door panel, approx. 11. Watch out for that last screw as there isn't anything else holding the outside panel, inside panel and control panel together other than those screws. I then unplugged the old dispenser backed out another 6 screws and replaced the old dispenser with the new one. Put it all back together within about a half hour.
Was this helpful?
Thank you for voting!
Detergent cap would not stay closed
2 of 3 people found this instruction helpful.
  • Michelle from Carlisle, PA
  • Easy
  • Less than 15 mins
  • Screw drivers
After removing the screws, the front of the dishwasher easily came off. I put 2 screws back in to hold the control panel in place. I did not want that to dangle while replacing the part. The part came off easily after removing the screws. Everything went together easy.
Was this helpful?
Thank you for voting!
All Instructions for the PDW9280J10SS
91 - 105 of 432