My Orders
P1175108S Caloric Range Hood - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The switch on the exhaust fan for the grill part of the stove went bad. I found the part on your site easily , ordered it and got it within 4 days.
13 of 22 people
found this instruction helpful.
-
Al from Abbeville, AL
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I simply looked at the new switch , to see how it fastened in the stove. It had plastic clips that were easily depressed to allow the swithch to be removed. I removed it , (after turning the circuit breaker off to the stove) removed the three wires , and replace them on the new switch and simply pushed it in the space. It snapped in place
... Read more
, and the job was done . Works great!
Read less
Was this helpful?
Thank you for voting!
Removing the old fan rocker switch on our Jenn Air gas range and replacing it with the new one
3 of 4 people
found this instruction helpful.
-
Donald from OURAY, CO
- Really Easy
- Less than 15 mins
-
Pliers
It is really easy to replace IF you know that the tabs that hold the switch in are ON THE TOP AND NOT ON THE SIDES. I wasted a lot of time prying on the sides to get the switch out. It would have been really easy if I had known the tabs were on the top and bottom.
Was this helpful?
Thank you for voting!