My Orders
MWX4 Washer - Overview
Models starting with MWX4
Click on the best match to narrow your results.
- MWX4087SW119 General Electric Washer
- MWX411REW0 Frigidaire Washer
- MWX413REW0 Frigidaire Washer
- MWX413REW1 Frigidaire Washer
- MWX433RED0 Frigidaire Washer
- MWX433RED1 Frigidaire Washer
- MWX433RED2 Frigidaire Washer
- MWX433RED3 Frigidaire Washer
- MWX433REW0 Frigidaire Washer
- MWX433REW1 Frigidaire Washer
- MWX433REW2 Frigidaire Washer
- MWX433REW3 Frigidaire Washer
- MWX445MBD0 Frigidaire Washer (27")
- MWX445MBD2 Frigidaire Washer
- MWX445MBD3 Frigidaire Washer
- MWX445MBD4 Frigidaire Washer
- MWX445MBW0 Tappan Washer (27")
- MWX445MBW1 Frigidaire Washer (27")
- MWX445MBW2 Frigidaire Washer
- MWX445MBW3 Frigidaire Washer
- MWX445MBW4 Frigidaire Washer
- MWX445MBWD0 Gibson Washer (27")
- MWX445MBWO Frigidaire Washer (27")
- MWX445MBWW0 Frigidaire Washer (27")
- MWX445RBD0 Frigidaire Washer (27")
- MWX445RBD2 Frigidaire Washer
- MWX445RBD4 Frigidaire Washer
- MWX445RBW0 Tappan Washer (27")
- MWX445RBW1 Frigidaire Washer (27")
- MWX445RBW2 Frigidaire Washer
- MWX445RBW3 Frigidaire Washer
- MWX445RBW4 Frigidaire Washer
- MWX445RBWW0 Gibson Washer (27")
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$16.05
In Stock
Timer Knob Clip
Part #WH1X2117
The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip. This part is clear plastic and is...Read more about 1 inch in size. Many of our customers have rated this repair as easy, and the only tools you may require are a set of needle-nose pliers. This is an OEM part sourced directly from the manufacturer.
Read less
$24.41
In Stock
Drive V-Belt
Part #134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does not start, drain, spin properly (will not spin/spins slowly/will not agitate properly), or if your washer shakes or moves during the cycle; ch...Read moreeck your drive belt for signs of wear and tear. Replace the drive belt if you notice that the belt looks damaged. This OEM part is approximately 35 inches in length, and sold individually.
Read less
$15.00
In Stock
V-Style Drive Belt
Part #WH1X2026
This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise. If you have a top-load washer, a drive belt may be connecting the transmission to the drive motor. It would generally be a rubber V-belt covered in fabric to a...Read morellow free movement. Or it could be a rubber belt aided by a tensioning device like an idler pulley, to stop the motor from causing too much friction to the belt. For front-loaders, the drive belt goes between the drive motor and the wash basket. If your drive belt is worn or frayed, it should be replaced straight away. After replacing the drive belt, run a wash cycle to ensure the belt is correctly fitted.
Read less
$158.22
In Stock
Drain Pump - 120V 60 Hz.
Part #137221600
This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red flapper to prevent drain backflow. You will need to remove the front panel of your washer to access the drain pump. The tools you will need fo...Read morer the repair are a Phillips screw driver, a putty knife, a pair of slip joint pliers, and a 5/16 nut driver. Be sure to disconnect the water supply from your washer before doing the repair. The metal edges on the appliance are sharp, so use work gloves to safely complete the repair.
Read less
$117.66
In Stock
Water Inlet Valve
Part #134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve is in any way damaged or defective, it may be slow to fill or even leak. Before beginning this replacement, make sure to unplug the washer fr...Read moreom the power range or shut off the house circuit breaker. Remember to wear gloves for safety. Refer to the installation instructions and the diagram provided by the manufacturer for best results and accuracy.
Read less
$26.35
Special Order
Screw-In Plastic Leveling Leg
Part #134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.
$70.95
In Stock
Water Inlet Valve with Outlet Insert
Part #WH13X81
This washing machine water inlet valve has two ports for water to enter.
No Longer Available
Timer Knob with Clip
Part #WH1X2757
This part is the replacement timer knob for your washer. It is made of white plastic and is about 1 ¼ inches in diameter. The timer knob sits on the timer shaft and allows you to choose the wash cycle that is suitable for you. If your timer knob is stripped or broken, you will need to replace it. To replace the timer knob, carefully remov...Read moree it from the shaft, and slide the new timer on. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Read less
No Longer Available
Tub Seal Assembly
Part #5303279394
If you have a leaky washer, then your tub seal may be the culprit. The tub seal assembly may also be known as the washer tub seal, and is a part for your washer. The function of this piece is to make sure water does not lead from between the outer tub and the spin basket from around your basket drive shaft within your washer. To replace y...Read moreour old part with this one you will need a flathead screwdriver, Phillips head screwdriver, pliers, putty knife, 7/16 socket, spanner wrench, and a hammer.
Read less
No Longer Available
$200.22
In Stock
Remote Style Pump with Motor
Part #131268401
Use this with either a top load or front load washer. This pump has an horizontal mount.
No Longer Available
Drain Hose
Part #131461200
This drain hose is designed for use in your washer. The function of this part is to carry water from the drain pump to the house drain. If your washer is leaking or will not drain, you may need to replace the drain hose. This part is black in color and is made of plastic. This drain hose comes with a 90-degree elbow attachment. Before you...Read more begin this repair, be sure to disconnect the power supply, as well as the water supply to the washer. This part is sold individually. This is an OEM part sourced directly from the manufacturer.
Read less
Common Symptoms of models starting with MWX4
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More