My Orders
MW4371G (XAA) Samsung Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Turntable Quit
5 of 7 people
found this instruction helpful.
-
RICHARD from OKLAHOMA CITY, OK
- Really Easy
- Less than 15 mins
-
Screw drivers
Snipped four corners off inspection panel,removed one phillips screw and two elect. Connections. Reverse process.
Was this helpful?
Thank you for voting!
The microwave would not turn on or would run with the door open
6 of 13 people
found this instruction helpful.
-
Raymond from TROY, OH
- Easy
- 1- 2 hours
-
Screw drivers
Other tools that are usefull long needle nose pliers, long thin blade screw driver and small magnetic flashlight. Place the microwave on a work bench and remove the case it cover 3 sides. Place the microwave on a chair so it can stand with the controls up. You are replacing the lower door microswitch. The switch is located behind the
... Read more
control panel in the lower part of the area. The switch is several inches inside this area and your hands will not fit. Take care when moving wires and a couple of sensors. Use the thin blade screwdriver to release a tab holding the switch in place. Do not break this tab. Take the needle nose pliers and remove the switch. Put the wires on the new switch, open the door a short distance so a door lever moves enough to put the microswitch back into the bracket.
Read less
Was this helpful?
Thank you for voting!
Bulb out
-
Clifton C from Kingsland, TX
- Easy
- 15 - 30 mins
-
Screw drivers
Pretty easy tear down and assembly once I removed it from cabinet (built in micro)
Was this helpful?
Thank you for voting!