MRTW Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Crisper Drawer Glass Shelf slid out of the frame while being cleaned and shattered.
44 of 55 people
found this instruction helpful.
-
Ernesto from Porter, TX
- Really Easy
- Less than 15 mins
The repair didn't require any tools at all. Just simply slide the new glass shelf carefully into the the frame and while holding it horizontally slide the frame back into the rails. This took less than a minute to accomplish. Very satisfied with the results.
Was this helpful?
Thank you for voting!
Fresh food door gasket
44 of 57 people
found this instruction helpful.
-
Thomas from Bonifay, FL
- Really Easy
- Less than 15 mins
Useing 2 fingers pulled old one out from its seat grove in door and started at one corner pressing the new one in groved slot the old one came out from. Auctually took less than 5 minutes
Was this helpful?
Thank you for voting!
ice forming in freezer around door, seal miss formed
53 of 85 people
found this instruction helpful.
-
James from Jacksonville, FL
- Really Easy
- Less than 15 mins
removed orig gasket and installed new one
Was this helpful?
Thank you for voting!
I pulled the refridgerator door open and the handle snapped off.
35 of 37 people
found this instruction helpful.
-
Sara from Warrensburg, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
This repair was very easy and took less than five minutes. I used the same screws that were on the fridge to put the handle in place. All I needed was a screwdriver. I would also like to add that when I ordered this part it was shipped the same exact day and I received it the next day. It was incredibly fast and I will use them again in t
... Read more
he future. I recommend this company to those who need to replace or repair a part. Thanks PartSelect!
Read less
Was this helpful?
Thank you for voting!
Handle broke off refrigerator door
36 of 41 people
found this instruction helpful.
-
Brenda from Manchester, CT
- Really Easy
- 30 - 60 mins
-
Screw drivers
The lower attachment of the handle needs to be put on first with the top of the handle pointing to the left of the door. Then the top part can be swung in place and screwed on easily
Was this helpful?
Thank you for voting!
Plastic frame broken
32 of 38 people
found this instruction helpful.
-
James from Owego, NY
- Really Easy
- Less than 15 mins
Lifted out old part, removed glass shelf and slid it into position in new frame. Reploaced the frame in refridgerator. Slid plastic storage bins into place. Job Done.
Was this helpful?
Thank you for voting!
Broken Handle on Main Door
33 of 41 people
found this instruction helpful.
-
Roy F from Oakdale, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my v
... Read more
arious appliance parts from you
Respectfully
Roy
Respectfully
Roy
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Brand new refrigerator, but evaporator fan blade broken, causing considerable vibration and noise.
30 of 35 people
found this instruction helpful.
-
John from Morgantown, WV
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Really, really, really easy:
1.Unplug refrigerator (electrical safety).
2.Remove cardboard cover at bottom of refrigerator (two short self-tapping bolts) with a wrench.
3.Pull old fan blade off fan motor shaft (just held on by a compression fitting--no tools needed).
4.Push new fan blade on shaft.
5. Replace card ... Read more board cover.
6. Plug in refrigerator, write nasty letter to Frigidaire.
1.Unplug refrigerator (electrical safety).
2.Remove cardboard cover at bottom of refrigerator (two short self-tapping bolts) with a wrench.
3.Pull old fan blade off fan motor shaft (just held on by a compression fitting--no tools needed).
4.Push new fan blade on shaft.
5. Replace card ... Read more board cover.
6. Plug in refrigerator, write nasty letter to Frigidaire.
Read less
Was this helpful?
Thank you for voting!
Door Gasket was damaged and required full replacement
30 of 35 people
found this instruction helpful.
-
TOM from LOVELAND, OH
- Really Easy
- Less than 15 mins
The repair was very, very easy. The old Gasket was easily removed by pulling at (1) of the (4) corners and simply pull from slot around the full perimeter of the door. No tools of any kind are needed. Replacement of the new Gasket was simply to again start at (1) corner by pushing new gasket into the perimeter slot and using fingers pu
... Read more
sh into the door grove all the way around. This install took no more than 10-15 minutes max.
Read less
Was this helpful?
Thank you for voting!
Glass shattered
29 of 34 people
found this instruction helpful.
-
Adona from Gretna, LA
- Really Easy
- Less than 15 mins
Don't ever tell your 11 year old to clean the refridgerator. Something will almost definetly get broken like the glass shelf, but luckily I had parts select which in no time assisted me to find the exact part. I ordered the part, it came quickly and I replaced within seconds.
Thanks.
Thanks.
Was this helpful?
Thank you for voting!
Refrigerator door handle broke at the top of the door at the screw in point.
28 of 32 people
found this instruction helpful.
-
Lynette from FLUSHING, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the old handle and lined up the new one and screwed in.
Was this helpful?
Thank you for voting!
Lower handle broke.
27 of 29 people
found this instruction helpful.
-
Darrel from NORTH LIBERTY, IN
- Very Easy
- 15 - 30 mins
-
Screw drivers
Open refrigerator door to gain access to top door handle mounting screws. Remove two screws at top of the handle on the refrigerator door. Slide handle up to release the bottom mount. The handle is now removed. The bottom screw remains in the door. To install the handle slide the mount onto the bottom screw and check the fit. If the fit
... Read more
is loose screw it in clockwise and check the fit again. Adjust the screw until the bottom fits flush with the door face. Align the top two mounting screws and snug them up. Close the door and align the bottom handle with the top handle. Open the door and do a final tighten on the top two screws. Be careful not to over tighten because you can crack it.
Read less
Was this helpful?
Thank you for voting!
my grandson broke the refridgerator shelf retainer and the freezer gasket was damaged
26 of 28 people
found this instruction helpful.
-
Lanier from Opelousas, LA
- Really Easy
- 15 - 30 mins
First let me say that I am a female in my mid-50s.
It took a few seconds to see how the shelf retainer snapped into place and install it. No tools were required.
It took a little longer to see how the freezer gasket was attached. I ended up using a wide blade putty knife at the corners to help gently remove the old gas ... Read more ket. Then I slipped on the new gasket and pushed it gently into the proper groove. It was quick and easy. I really appreciate saving the cost of a repair man.
It took a few seconds to see how the shelf retainer snapped into place and install it. No tools were required.
It took a little longer to see how the freezer gasket was attached. I ended up using a wide blade putty knife at the corners to help gently remove the old gas ... Read more ket. Then I slipped on the new gasket and pushed it gently into the proper groove. It was quick and easy. I really appreciate saving the cost of a repair man.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Kids Broke The Retaining Bar On The Frige.
24 of 26 people
found this instruction helpful.
-
John from Eden, NY
- Really Easy
- Less than 15 mins
Simply snap the old ones out and install the new ones. Piece of cake. . . . . And saved some $$$.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original gasket damaged at bottom
24 of 29 people
found this instruction helpful.
-
Charles from Whittier, CA
- Easy
- 15 - 30 mins
-
Wrench set
At first I tried to insall the new gasket with the door still attached to the refrigerator. It was difficult to assure that the bottom of the gasket was properly installed at the bottom. As a result I removed the door from the refrigerator, finished installing the gasket and then put the door back on the refrigerator
Was this helpful?
Thank you for voting!