MRSF - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bottom trim piece on 24 year old stove had rusted. Replace trim piece was still available.
2 of 2 people
found this instruction helpful.
-
Donald from FAYETTEVILLE, NY
- Very Easy
- Less than 15 mins
-
Socket set
Very simple. Lift oven door off brackets and set on floor. Remove sheet metal screws holding on existing trim piece, Clean area beneath trim.
Put new trim piece on, don't tighten any of the screws until all have been started as some adjustment is needed to align the holes for the screws.
Put new trim piece on, don't tighten any of the screws until all have been started as some adjustment is needed to align the holes for the screws.
Was this helpful?
Thank you for voting!
just needed new GE burner bowls
2 of 2 people
found this instruction helpful.
-
Jacqueline from E WENATCHEE, WA
- Very Easy
- Less than 15 mins
Only instructions I have has nothing to do with installation. But I'd like to suggest that you find a better shipping method. Placed my order on Feb. 7, received message later same day that it'd shipped. I didn't receive it until Feb. 16th -- very poor delivery service.
Other Parts Used:
Was this helpful?
Thank you for voting!
broke
2 of 2 people
found this instruction helpful.
-
Barbara from Winston Salem, NC
- Really Easy
- 15 - 30 mins
-
Screw drivers
just replace the end cap with a new one all that was involue was to screw the new one in took about ten minutes and job done better than buying a new stove when the stove is still just like new. thank you for your on line help.
Was this helpful?
Thank you for voting!
rusted trim strip
3 of 5 people
found this instruction helpful.
-
Larry from Sarasota, FL
- Really Easy
- 15 - 30 mins
-
Socket set
remove screws, re-install screws
Was this helpful?
Thank you for voting!
Handle broke
2 of 2 people
found this instruction helpful.
-
Dean from Harrisonburg, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Took off the inside ( this allowed me to clean the glass) panel. Removed the two end parts with a screw driver. Replace the parts and we were good to go.
Was this helpful?
Thank you for voting!
The trim piece on the bottom of the door was rusted making the unit look really dirty and used.
2 of 2 people
found this instruction helpful.
-
Glenn from West Melbourne, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver
It was pretty simple. Just remove the door as the bottom piece holds all the parts together. Place on table top and remove old trim. Install new trim and install door. The only difficult part was the trim had a space for the glass door front. I opened up the space so that the glass would seat easier. Went together real easy. Stove
... Read more
looks like it's brand new.
Read less
Was this helpful?
Thank you for voting!
The end cap door handles on our range were broken.
2 of 2 people
found this instruction helpful.
-
Gordon from IOWA CITY, IA
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
The parts were shipped quickly and were what I ordered. The one suggestion I would make to the installer would be to drill out the insert holes a bit in the plastic columns in the inside of the bracket. There are two such columns and they are used to provide further strength to the end cap. However, the diameter of the screw is too large
... Read more
for the insert hole because as I installed the first bracket one of these columns broke. After drilling out the insert hole, the screws were still snug and the end cap (and door handle) was quite solid.
Read less
Was this helpful?
Thank you for voting!
Both end caps were broken removed
2 of 2 people
found this instruction helpful.
-
Johnson from LUFKIN, TX
- Very Easy
- 15 - 30 mins
Removed torx head screws. Removed broken pieces of the end caps. Replaced the handle installed the end cap screws.
Was this helpful?
Thank you for voting!
Freezer ice maker not dispensing ice.
2 of 2 people
found this instruction helpful.
-
Johnny from MORGAN CITY, LA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Ordered Ice Bin Auger and changed with no problem. Found how to change on YouTube and followed video.
Was this helpful?
Thank you for voting!
fan motor needed replacing
2 of 2 people
found this instruction helpful.
-
Joe from ALBANY, GA
- Very Easy
- 15 - 30 mins
-
Screw drivers
System not cooling. removed back cover and notice fan not rotating. Looked up unit and found diagram. Ordered motor which was received in less than 5 business days.
Replacement was super easy. Just unscrewed from frame, pulled off fan, put fan on new motor and remounted back in frame. Took 10 minutes tops.
Replacement was super easy. Just unscrewed from frame, pulled off fan, put fan on new motor and remounted back in frame. Took 10 minutes tops.
Was this helpful?
Thank you for voting!
Alarm would sound whenever oven turned on - with an error message code
2 of 2 people
found this instruction helpful.
-
Carolyn from MASON, MI
- Really Easy
- 30 - 60 mins
-
Screw drivers
Watched the video on the PartSelect site. Could not have been an easier repair and I saved the cost of a service call - probably saved at least $100 - $150 in service call and I can only guess what the labor cost would have been. Will use this business again for other appliance repairs on my older stove, washer, etc. By the way - the o
... Read more
fficial Kenmore site said this part was no longer made and unavailable --- Thank you PartSelect for having the part and saving me the cost of buying a new stove!
Read less
Was this helpful?
Thank you for voting!
replaced broken oven door handle
2 of 2 people
found this instruction helpful.
-
John from BOCA RATON, FL
- Very Easy
- 30 - 60 mins
-
Pliers, Screw drivers
On a 18 year old electric GE range: amazing not the exact handle but it does fit perfectly and looks great. If your somewhat handy this is very easy and can be completed in less than a half hour. Save the screws from the old handle, they can be used again.
Was this helpful?
Thank you for voting!
the old screws were not correct so it took 1/2 hour for me to find screws that would. there should have been proper screws sent with the end cap.
2 of 2 people
found this instruction helpful.
-
anthony from Jacksonville, FL
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
I attached the end caps to my existing handle, but had to squeeze the parts together very hard to get them to mesh to the correct distance of the holes. I removed the screws holding outside frame of the oven door. I then opened the door fully, propping it up on my knee and removed the inside end cap screws. Placing the handle in positi
... Read more
on underneath the propped door, I attached the screws. Lastly I reassembled the door.
Read less
Was this helpful?
Thank you for voting!
Replaced door gasket and hinge closers on Refrigerator door.
2 of 2 people
found this instruction helpful.
-
David E from EL SOBRANTE, CA
- Easy
- 30 - 60 mins
-
Nutdriver, Socket set
I just followed the excellent Video for both parts. The door gasket is tedious but doable, just take a deep breath and press on. Putty knife is handy to push edge of gasket under the plastic lip. The closer devices take 3 minutes - simple R&R. Check the videos - they're pretty clear and detailed.
Was this helpful?
Thank you for voting!
door handle and end caps broke
2 of 2 people
found this instruction helpful.
-
Jack from BARTLETT, TN
- Very Difficult
- More than 2 hours
parts need to be delivered to do repair, its been over a month. customer service is not taking calls. I have paid for parts I did not receive.
Was this helpful?
Thank you for voting!