MLY2256ADB Maytag Range - Instructions

The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.

Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.

Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.

put in new flashtube

I was very impressed with the ease in ordering the part, and the speed of delivery. All I needed was a second oven rack so that when I bake cookies, I can bake two trays instead of one, I get done in half the time now. Thank you Part Select!!!

pull wire off of spark electrode unscrew old burner. screw on new burner attach wire to new spark electrode.

I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

Pulled cooking grate off, twisted burner head counter clockwise 1/8 of a turn, pulled up and out. Removed 2 connecting wires.put new burner head on in reverse order. Simple about 2 minutes including opening box.