LS12 - Parts

This replacement part is an authentic OEM bolt designed for Makita circular saws. The purpose of this bolt is to secure saw blade to the spindle which driver it. This hex socket head bolt is sold individually. Please note, you would need a hex key/allen wrench to install/remove this bolt.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Makita compound miter saws. This is an identical replacement for a missing or faulty switch which is responsible for controlling the on/off function of the tool. Over time mechanical components may begin to wear out and break down eventual...Read morely requiring a replacement to ensure proper functionality. It is a high-quality plastic body switch which is sold individually.

This is an authentic OEM sourced item designed for use with Makita compound miter saws. This flat head screw is used to secure the center cover which is sold separately. Please note, one metal screw is included per order. You will need a Phillips head screwdriver to install or remove this hardware.

This is an authentic replacement part manufactured for use with Makita miter saws, drills, and planers. Wave washers are commonly used to provide spacing between parts and to deflect pressure between parts. The wave washer is sold individually.

This genuine OEM woodruff key is a small, semicircular metal piece used in various power tools to connect rotating parts, such as shafts or gears, to other components like wheels or pulleys. It prevents slippage between these parts, ensuring smooth synchronization and power transmission. With a width of 3/32 inches and a length of 5/8 inc...Read morehes, consider replacing a woodruff key if you notice misalignment or excessive movement between the connected parts. Be sure to inspect the key for signs of wear, damage, or bending. Removing the key depends on the make and model of your tool. If the key is visible, gently tap it from one side using a small hammer and a punch or drift pin. This will dislodge it from its slot. If the key is stuck or difficult to access, you may need to partially disassemble the tool to gain better access to the key. Once the key is loose, carefully pull it out using pliers. Clean the keyway and slot before installing the new key. Before making your purchase, remember that this component is sold individually.

The pin fits between the ring spring and the compression spring. This item is available individually and is made of metal. This is a genuine replacement part sourced from the original manufacturer for use with saws made by Makita. When replacing this part a set of pliers might be required during the installation process. It will require replacing if it becomes bent or broken.

This is an authentic Makita replacement part designed for use with miter saws. It helps to distribute the pressure evenly and provides a tight seal for the link arm. It is made out of metal and it is sold individually. To complete this repair you will need a wrench.

This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it has multiple applications based on your tool. Please refer to diagrams for correct application.

This is an authentic Makita replacement part manufactured for use with power tools. The ball bearing is used to reduce friction between a moving part and a fixed assembly. This ball bearing is available as an individual replacement part, please see model diagram for associative parts.

The sub fence includes a warning label and fits between the sub fence plate and the guide fence. This item is available as an individual replacement part and is an OEM part sourced from the manufacturer and used in Makita compound miter saws. It is made of metal and a screwdriver and a socket set might be required during the replacement of this part. It may become broken and will need to be replaced.

This is an OEM part sourced directly from the manufacturer. The handle set is found on Makita compound miter saws. This part is made of high-quality plastic, and includes both halves of the handle assembly. You will require a screwdriver when replacing this part. This item is sold individually.