LS12 - Parts

This is an genuine OEM sourced component that is specially made for Makita miter saws. The blade guard has six central mounting posts to accept the center plate. If your guard has only four posts, you will also need to purchase the #344596-4 center plate which has ...Read moresix holes to accommodate the new style guard. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and application of this cover. Keep in mind this high-quality part is made of durable clear plastic and is sold individually. Note, the hardware to secure it is sold separately.

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with miter saws. The laser connects to the upper saw case and is used to indicate the precise location that the blade will cut through the material. This item is sold as an individual replacement part.

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fi...Read morex an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This cord guard / strain reliever is a genuine Makita replacement part. It covers the final portion of cord before entering the tool, providing extra rigidness and preventing cord damage. Over time these cord guards break down and require replacement. The guard is constructed of heavy duty rubber compound for toughness. This cord guar...Read mored is compatible with the tools listed below. It is not guaranteed to fit any other power tool models.

This genuine OEM sourced socket wrench is designed for use with Makita saws. This special socket wrench is perfect replacement for the original wrench that comes with the new equipment, it allows user to make needed adjustments. Angular profile of this item makes tightening and loosening the hardware very easy. Please note this durable metal wrench is sold individually.

This pan head screw is an authentic replacement part. It is sourced directly from original equipment manufacturer for use with Makita power tools. This standard hardware is used in different locations depending on equipment. To ensure correct application please make sure to check appropriate diagrams. Includes one (1) metal screw. You will need a torx or a flat-head screwdriver to tighten or loosen this screw.

This replacement hardware is a genuine OEM sourced part, it is not an aftermarket imitation. It is a commonly used with Makita power tools. This standard hardware has multiple applications depending on the tool. Please refer to appropriate diagrams for correct location and use of this screw. It is a pan head screw which is sold individual...Read morely. You will need a Phillips head screwdriver to install or remove this hardware.

This is a genuine Makita replacement tapping screw. It is sourced directly from original equipment manufacturer for use with a variety of power equipment. This screw is a piece of standard hardware that has multiple uses depending on your tool. Please check appropriate diagrams to ensure correct location and application for this item. It ...Read moreis a metal pan head screw that requires a screwdriver to install/remove it. Includes one (1) screw per order.

This is a genuine Makita replacement tapping screw. It is sourced directly from original equipment manufacturer for use with a variety of power tools. This hardware has multiple uses depending on your tool. Please make sure to check appropriate diagrams for correct location and application of this item. This pan-head tapping screw is sold individually. You will need a screwdriver to install or remove it.

This is an authentic replacement part sourced directly from the manufacturer. The tapping screw is commonly found in Makita power tools such as band saws, miter saws, and sanders. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in...Read more the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. The tapping screw is provided as an individual replacement part.

This is an authentic OEM supplied replacement item designed for Makita miter saws. This screw allows user to adjust the miter angle. To do so loosen the grip by turning counterclockwise. Turn the turn base while pressing down the lock lever. When you have moved the grip to the position where the pointer points to the desired angle on the ...Read moremiter scale, securely tighten the grip clockwise. It is made out of metal and it is sold individually. This table lock screw is 12-5/8" long with threading at both ends.