EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LRFD25850SW (00) LG Refrigerator - Instructions

All Instructions for the LRFD25850SW
31 - 45 of 111

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
leakey door gaskets
4 of 6 people found this instruction helpful.
  • Ernie from LEOMINSTER, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
viewed video and followed instructions was a piece of cake
Was this helpful?
Thank you for voting!
Door switch would not turn on interior refrigerator light.
3 of 4 people found this instruction helpful.
  • Jane from SHORELINE, WA
  • Very Easy
  • Less than 15 mins
I had previously watched a YouTube video (do this first!!) on a similar Kenmore model so I knew what to look out for: (1) turned off power, (2) took thin putty knife to slip under outer lip of switch (most screwdrivers are too thick), (3) wiggled switch at front end to release the tab, (4) unplugged from the socket, (5) plugged in new sw itch, (6) popped new switch back into door, (7) turned on power. Voila !! Super easy. I couldn't believe it.
Was this helpful?
Thank you for voting!
Ice crystals appearing on the face of the freezer draws
2 of 2 people found this instruction helpful.
  • Craig from SPRING HILL, FL
  • Really Easy
  • Less than 15 mins
Part Select had a great video which made the repair easy, using a putty knife to start removing the freeze door gasket. Once removed the install is simple just snap the new gasket into the track, but start at the corner. Other company's have a video requiring you to remove the entire freezer compartment out of the appliance, unnecessary w aste of time and labor.
Was this helpful?
Thank you for voting!
light didn't come on when the door was opened
2 of 2 people found this instruction helpful.
  • William L from SUMAS, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I took a very thin bladed screwdriver and took the old part out -carefully.
The new part fit in quite easily.
Was this helpful?
Thank you for voting!
Pops right in
2 of 2 people found this instruction helpful.
  • Darlene from MISSION HILLS, CA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Pops right In
Was this helpful?
Thank you for voting!
Switch stops working
2 of 2 people found this instruction helpful.
  • David from PENNSVILLE, NJ
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
Icing up in the freezer due to poor gasket
2 of 2 people found this instruction helpful.
  • Maryann from BROOKFIELD, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched a couple of YouTube videos and then went at it
Was this helpful?
Thank you for voting!
Replaced hose and it was exactly what I needed.
3 of 5 people found this instruction helpful.
  • Donald from CLEBURNE, TX
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock
Was this helpful?
Thank you for voting!
Broken lower shelf frame and crisper drawer fronts had cracked
2 of 2 people found this instruction helpful.
  • Deborah from PARMA, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed screws and the plastic shelf tops from the broken shelf. These parts are sold separately. Do NOT throw anything away until you know you have what you need.
Gentle pull the shelf to spread it enough to get the plastic pieces in. This is the only hard part. Screw the slides onto the new frame. Snap the covers into the crisper fronts. You’ll want to force them in but don’t. They will snap and break.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people found this instruction helpful.
  • shirley from ONALASKA, WI
  • Easy
  • 30 - 60 mins
  • Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
lower shelf needed replacement (cracked in front, thin drawer guides broken)
2 of 3 people found this instruction helpful.
  • John from Mountain View, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Food off top of shelf, drawers come out, glass tops come off, lift the whole unit up (can be a little heavy. Tilt sideways to angle past doors (remove door's lower bins as needed by removing food and lifting up). Turn upside down, remove 3 screws from metal rod and remove metal rod (may require prying out with screwdriver). Remove texture d plastic top pieces from each side; some flexing is required to get one side up, then the other. Remove two hinged drawer covers by pinching in at their hinge points.

This is your last chance to clear all the walls, floor, and ledges at the bottom of your fridge. Just sayin'.

Put new shelf upside down on counter. Transfer metal rod to new shelf, screw it in. Transfer hinged drawer covers. Transfer textured plastic topic pieces, again putting one side (of each) in first and flexing unit a little to get other side in. Turn right side up and angle back into refrigerator.

Bring shelf flat and push to the back of the refrigerator until it is flush with the back. Lower whole unit until it rests on top of the side rails where drawers slide in. Left side has a tongue that will fit into a 2" or so notch near the front, right side will rest on top of a round bumper. Front coldness control should still operate smoothly. Put drawers in to make sure they glide and close smoothly. Put glass shelf on top and press down lightly to make sure lower shelf is stable and glass fits neatly into its plastic frame. Replace any door bins you removed.

Ta da!
Was this helpful?
Thank you for voting!
Lights didn't come on when door was opened
1 person found this instruction helpful.
  • Philip from Ashland, MA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
I have moderate to good mechanical skills, but getting the old switch out was a sizeable challenge. Since this switch suffered some damage during extraction, I was lucky to have ordered a new one to replace it. Reinstall took approximately 90 seconds. PartSelect saved me an expensive service call.
Was this helpful?
Thank you for voting!
Light quit coming on when door opened.
1 person found this instruction helpful.
  • Calvin from Northome, MN
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Unplug from wall receptacle. Pry switch out with screwdriver while pushing on inner tab. Then disconnect electrical plug.
Was this helpful?
Thank you for voting!
Freezer door gasket needed replacing.
1 person found this instruction helpful.
  • Stephen from DICKINSON, TX
  • Really Easy
  • Less than 15 mins
  • Pliers
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Was this helpful?
Thank you for voting!
Grams had cracked in front
1 person found this instruction helpful.
  • Milton from WILTON, ME
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Super easy. Removal of old shelf and 3 screws was obvious how to put in new shelf. Thank you. Excellent cost, delivery and ease of transaction.
Was this helpful?
Thank you for voting!
All Instructions for the LRFD25850SW
31 - 45 of 111