LR12-SCAND (1998-04) Jonsered Lawn Tractor - Parts

This is a genuine replacement part manufactured for use with riding lawnmowers. This is the outer tire for the front wheels. The tire tread wears from normal use, it is recommended to replace worn tires. This tire is sold individually, the inner tube and other associative parts are available separately.

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

This is an authentic replacement part manufactured for use with lawn and garden equipment. This valve stem is used with equipment that has inflatable tires. The valve is a one-way valve allowing air into the tire while not letting air escape the valve. This valve stem is sold as an individual replacement part, please see model diagram for associative parts and compatibility.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

The washer goes between the center lock nut and the steering wheel. This item is available as an individual replacement part. It is an OEM from Poulan, Husqvarna, and Weed Eater for use in lawn tractors and ride mowers. When replacing this item a wrench might be required during the installation process. This part is made out of metal and will need to be replaced if it bends or breaks.

This headlight switch is designed for use with various models of ride-on mowers/tractors, features an on/off mode for turning the headlines on and off, and is a genuine OEM part. If your headlights do not turn on, it is recommended that you inspect the light bulbs before replacing this switch. It is recommended that if you have a multimet...Read moreer, you test this switch for continuity prior to ordering a new switch. To replace this switch, lift or gain access to the steering housing of the lawnmower. Locate the tabs securing the switch, which will be underneath where they appear on the user interface panel. Push the tabs on the side of the switch inwards to release the switch out from its panel, and then disconnect the wires from the switch, taking note of their positions. Connect the new switch terminals to the previous wires, push the new switch into its panel, and test the lights to make sure they work.

This genuine manufacturer-sourced component is specially made for use with Poulan, Husqvarna and Ryobi lawn mowers. It is an identical replacement for a missing or a faulty front tube that was installed on a new unit. This is the tube for the front tire. Please make sure to refer to the appropriate diagrams of your model for the correct l...Read moreocation and application of this part. Keep in mind this high-quality tube is made of durable rubber and is sold individually.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This genuine OEM sourced replacement screw that is specially designed for use with riding lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This hex head screw is sold individually.

This is a genuine OEM part. The spacer axle is made for use with many lawn tractors, and is sold individually. This item helps to secure the wheel to the axle assembly. A flat head screwdriver and a pair of pliers are needed for the removal and replacement.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.